| TYPICAL PROPERTIES |
NICKEL ANTI-SEIZE |
| Consistency |
NLGI No. 2 |
| Penetration (1/10mm at 25°C, 60x) ASTM D217 |
275 |
| Penetration change (10 000 x) |
35 |
| Dropping point |
None |
| Timken OK load, kg (ASTM D2509) |
>25 |
| Copper corrosion test (ASTM D130) |
1b |
| Base oil viscosity at 40°C, cSt (Brookfield) |
100 |
| Max operating temperature as thread/anti-seize lubricant |
1 400°C |
| Key metallic component |
Nickel |
| Colour |
Silver |
| Exceeds requirements of MIL-A-907E (US Military Spec) |
Yes |
| Average torque to loosen threaded connection after being subject to: |
|
| 565°C |
62Nm |
| 1 100°C |
190Nm |
| Co-efficient of friction at 200N |
0.136 |
| Compliance with latest First World Environmental Legislation |
No |
| Resistance to contact with Ammonia |
Fair |
| Resistance to Electrolytic Galvanic Corrosion |
Fair |
| Suitable for use on Austenitic/Stainless Steels |
Fair |
| High load, slow-moving lubricating properties |
OK |
| Protection against corrosion of battery terminals |
OK |
| Apply to back of disc pads to eliminate squeal |
No |
| Contents of aerosol packs |
350 ml |
| Packing in tubes |
No |
| Other packs (500g, 5kg, 15kg, 50kg & 180kg) |
Yes |
Malaysia
