LAN Extenders 16 Port Central Hub | 16 Channel Ethernet Extender Hub: Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Catacomm Corporation Sdn Bhd

Description

AN-LAN-EXT-HUB16 16-Channel Ethernet Extender Hub is a Multi-Channel Ethernet Extender Hub. It simultaneously receives multiple network signals, supports both a point-to-point and point to multi-point. It is used to transmit data network signal over any pair of 2-wire such as twisted pair, Cat5, coaxial cable and power line, etc. The max distance reach 1,000 meters. Max physical bandwidth can reach 500Mbps.

This product can be widely used for network extension system, network security system, network information publishing system, network renovation and expansion systems, elevator, railway, urban traffic, mining and telecommunication, etc.

Features

Max transmission distance reach 1,000m (RG59/RVS 2×1mm2).
Max physical bandwidth can reach 500Mbps.
Transmit high-speed network data over 2-wire.
Transparent transmission, no adjustment, no need to change the upper software.
19 inch rack size installation, plug and play, anti-interference design.

Specifications

Category		Description
Power	Power Input	220VAC / 110VAC±10％
Ethernet network	Standard Compliance	IEEE 802.3, IEEE 802.3u
Ethernet network	Physical Rate	500Mbps
Physical Characteristic	Dimensions (L × W × H)	483mm×45mm×150mm
	Material	Aluminum
	Net Weight	1.6KGS/PC
Operating Environment	Working Temperature	-20℃～60℃
Operating Environment	Working Humidity	＜95% (Non-condensation)

Installation

Cable tips

Telephone Line: Category 3 or above

Power Line: RVV, RVS, RVVP

UTP Cable: Category 5 or above

Coaxial Cable: RG59 or above

Accessories Spec

RJ45 port by EIA / TIA568B

Dimension

Installation Instructions

Step	Installation Instruction	Step	Installation Instruction
1	Connect the coaxial cable to the BNC terminal of hub(1)	6	General power indicator is always on when working(6)
2	Connect the two-wire to the 2P terminal of hub(2)	7	Unit power indicator is always on when working(7)
3	The RJ45 terminal of the end-side network devices connect to(3)	8	Network data indicator is always on when working(8)
4	Connect power（220VAC）to the power terminal(4)	9	Unit line indicator is always on or flashing when working(9)
5	Power switch(5)	10	Grounding terminal(10)

Connection

Use Tips

When you use AN-LAN-EXT-HUB16, please follow the below tips as a reference, in order to reduce the fault in the process of using and the inspection work.

AN-LAN-EXT-HUB16 can be connected with single channel Ethernet Extender, The device supports auto-negotiation allocate master and slave. It also can be set master-slave side and grouped by software. Each group (one point to multi-point communications group) only allows one Master, others are Slaves. Otherwise, the network data won’t be able to transmit. Master suggests to be installed in Local side, AN-LAN-EXT-HUB16 suggests to be installed in Local.
Signal transmission cable must be the copper cable. Other material cables will cause the decrease of signal transmission quality and distance.
Long distance cable connection must be formal connection methods, such as welding or using connectors.
Coaxial cable, twisted-pair cable, telephone line and power line all can be used to transmit network data signal in projects. A variety of cables arbitrary mixed connection also can reduce the quality of signal.
Please choose matching power supply (220VAC).
There is no waterproof design for this product, please make sure it is used in dry environment.
If device fails, do not disassemble or repair it by yourself. Please contact us timely.

Ordering Information

AN-LAN-EXT-HUB16

LAN Extenders 16 port Central Hub, working with AN-LAN-EXT-ENH-500 (240) as remotes, AC or DC power.

More detail about Catacomm Corporation Sdn Bhd