Rocol Steamseal FOLIAC Graphite and Manganese Pipe Sealant

Rocol Steamseal FOLIAC Graphite and Manganese Pipe Sealant

Category: High Pressure Pipe Sealant Available
For more information, visit our official website at davor.com.my

Specifications
  • Appearance: Dark grey paste
  • Base Type: Linseed oil
  • Solid Lubricant: Graphite & Manganese
  • Operating Temperature (Degree Celcius): -20°C to +600°C
  • Pressure Resistance: 193 bar (2800 psi)
Description

Product Description

ROCOL® STEAMSEAL is a graphite & manganese compound giving efficient sealing for ferrous and non ferrous pipework, however we would recommend testing on stainless steel prior to putting in to service. It is a high pressure, setting pipe sealant for metallic threaded and flanged joints.


Application
It is primarily designed for the sealing of high pressure steam, air & water joints.


Features
- It has an excellent temperature range from -20°C to +600°C.
- It can resist pressures of up to 193 bar (2800 psi).
- Joints sealed are easy to break and clean.
- It sets hard but is flexible enough to resist vibration, thermal expansion and contraction of pipework.
- It is compatible with foam forming leak testers such as ROCOL Leak Detector Spray.


Direction of Use and Storage
ROCOL STEAMSEAL should not be applied in sub-zero temperatures. Ensure surfaces are clean and free of contaminants then apply with a brush.
- Remove any surface skinning and stir well before use.
- Joints should be assembled within 5 minutes of applying ROCOL STEAMSEAL
- Pressure testing should only be carried out after the PJC has been allowed to dry for a minimum of 24 hours at an ambient temperature of 20°C to 25°C. Drying time will be considerably lengthened if the ambient temperature is lower.
- Do not leave a fillet of sealant on the outside of the joint as this can drastically slow down the drying time.
- Hemp or other substitute fillers can be used on poor fitting joints, however, the STEAMSEAL must be applied to the male thread first, followed by the filler and then another coating of STEAMSEAL so that the filler is captive inside the STEAMSEAL.
- The storage temperature should be controlled between +1°C and +40°C.
- Shelf life is 2 years from date of manufacture.


Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei 

More detail about Davor Sdn Bhd
Davor Sdn Bhd
Davor Sdn Bhd Premium Greases & Oils Supplier Selangor, Industrial Lubricants KL, MRO Spray Products Malaysia, Lubricators & Equipment, Food Grade Lubricants ~ Davor Sdn Bhd
Contact Us flagMalaysia