Falling Sand Abrasion Testers

Falling Sand Abrasion Testers

Category: Abrasion Available
For more information, visit our official website at lnbtec.com

Description

    BGD 529 Falling Sand Abrasion Tester is designed according to ASTM D 968. It’s applicable to determine abrasion resistance performance of organic coating. Abrasive is allowed to fall from a specified height through a guide tube onto a coated panel until the substrate becomes visible. The amount of abrasive per unit film thickness is reported as the abrasion resistance of the coating on the panel.

◆ Funnel with fan-shaped swithch is more convenient to operate
◆ The distance between guide tube and specimen holder is calibrated by special tool which comes which tester, more precise.
◆ Funnel installation height can be adjusted freely by below bearing.
 

■ Overall dimensions:230mm×200mm×1500mm(length by width by height)
■ Length of conduct pipe:36 inch(914mm)
■ Inner diameter:0.75 inch(19mm)
■ Volume of hopper:3L
■ Weight of whole machine:25KG

■ Ordering Information

BGD 529---Falling Sand Abrasion Tester

BGD 1370---Standard Sand (25kg/package)

More detail about LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
LUX & BRILLIANCE TECHNOLOGIES SDN. BHD. Measuring Equipment Wholesaler Malaysia, Coating Instruments Supplier Penang, Hardware Tools Supply Kuala Lumpur (KL), Selangor ~ LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
Contact Us flagMalaysia