Comet W3811P Wireless thermometer, hygrometer for external probe, IoT Sigfox

Comet W3811P Wireless thermometer, hygrometer for external probe, IoT Sigfox

Category: Monitoring System Available
For more information, visit our official website at mobicon.com.sg

Description

The device measures the temperature and humidity from an external probe on the cable - you can choose it from an optional accessory. The sensor is characterized by a simple and compact design with the possibility of installation directly into the measured space. Model with external cable probe is also suitable for measurements in areas where the risk of poor reception sigfox. The probe can be placed at the measurement point and the device itself where is able to reach a better signal. The probe length must not exceed 30 meters. The probe can be used with a suitable sensor cap even in more demanding conditions.

The measured values are sent in an adjustable time interval (10 min to 24 h) by radio transmission in the Sigfox network to the COMET Cloud, from which the user can view them using a personal computer or mobile device.

The instrument can monitor up to 2 alarm limits of the measured variable. Exceeding these limits is indicated by sending an emergency message. COMET Cloud transmits this alarm message via e-mail to the selected user. The device is suitable for applications that tolerate the delay of information delivered by Sigfox (max. 10 min).

The availability of Sigfox network in a particular location

Check your Sigfox network availability before you buy your device. COMET devices in the Sigfox network can be used anywhere in the RC1 zone. Learn more about Sigfox (RC) Radio Zones.
 

TECHNICAL DATA

MEASURED VALUE

Temperature
Relative humidity
Counted values (dew point…)

TEMPERATURE SENSOR

Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution 0.1 °C
Response time t90 of temperature measurement (temperature step 20°C, air flow approximately 1m/s) according to the connected probe Digi/E

HUMIDITY SENSOR

Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution 0.1% RH

DEW POINT

Measuring range according to the connected probe Digi/E
Accuracy according to the connected probe Digi/E
Resolution according to the connected probe Digi/E

GENERAL TECHNICAL DATA

Operating temperature -30 to +60 °C
Channels 1x connectable temperature+humidity probe
Message transmission interval adjustable 10 minutes, 20 minutes, 30 minutes,1 hour, 3 hours, 6 hours, 12 hours, 24 hours
Alarm message sending interval 10 minutes
Operating frequency 868 MHz
Maximum transmission power 25mW
Sigfox radiation class 0U
Radio configuration zone RC1 (operation is possible in Europe, Iran, Oman and South Africa)
Typical range of transmitter 50 km in the field, 3 km in the city
Power Lithium battery 3.6 V, C size
Protection class IP65
Dimensions 126 x 89 x 40mm
Weight (including batteries) 190g
Warranty 3 years

 

BATTERY LIFETIME

Sending interval 10 minutes 20 minutes 30 minutes 1 hour 3 hours 6 hours 12 hours 24 hours
1x lithium battery A4206 - 8500mAh 1 year 2 years 3 years 6 years 10 years > 10 years > 10 years > 10 years

INCLUDED IN DELIVERY:

EXTERNAL PROBES ARE NOT INCLUDED IN DELIVERY

INSTRUCTION MANUAL DATASHEET

More detail about Mobicon-Remote Electronic Pte Ltd
Mobicon-Remote Electronic Pte Ltd
Mobicon-Remote Electronic Pte Ltd Electronics Components Distributor Singapore, Soldering Irons & Switches Supply, Measuring Instruments Supplier Singapore ~ Mobicon-Remote Electronic Pte Ltd
Contact Us flagSingapore