Salt Spray Test Chamber
Basic Salt Spray Test Chamber (S-016)
Basic Salt Spray Test Chamber (S-016)

 4
Basic Salt Spray Test Chamber
Basic Salt Spray Test Chamber
Basic Salt Spray Test Chamber

Basic Salt Spray Test Chamber (S-016)

Redmark Industry Sdn Bhd flag
Category: Salt Spray Test Chamber Available
For more information, visit our official website at redmarkindustry.com
Visit Official Site Contact Us
Description

Basic Salt Spray Test Chamber (S-016)


Basic Salt Spray Test Chamber

LIB basic salt spray chambers meet the requirements of basic and continuous salt spray tests, such as ASTM B117, ISO 9227 and similar international test standards, and can perform NSS, ASS and CASS test.
 

Specification For Basic Salt Spray Test Chamber

Provide a large selection of salt spray chambers to accommodate various types of product testing. Capacity available in 108L, 320L, 410L, 780L, 1000L, 1600L and more. More than 16 different models allow you to choose the size and performance best suited for your test application.

 

Model S-150 S-250 S-750 S-010 S-016 S-020
Internal dimensions (mm) 590*470*400 1000*640*500 1100*750*500 1000*1300*600 900*1600*720 1000*2000*800
Overall dimensions (mm) 1460*760*1140 1850*960*1350 1950*1030*1350 2000×1300×1600 2300×1300×1700 2700×1300×1900
Interior Volume (L) 110 320 410 780 1030 1600
Temperature Range Ambient ～ +60 ℃
Temperature Fluctuation ± 0.5 ℃
Temperature Deviation ± 2.0 ℃
 Humidity Range 95% ~ 98% RH
Salt Fog Deposition 1～2ml / 80cm2 · h
Spray Type Continuous / Periodic
Salt Fog Collected Fog collector and fog measure cylinder
Air Preheating Saturated air barrel 
Spraying System Atomizer tower and Spray nozzles
Controller PID controller
Safety Device Humidifier Dry-combustion Protection; Over-temperature Protection; Over-current Protection; Water Shortage Protection; Earth leakage Protection
Material Glass fiber reinforced plastics
Standard Configuration 6 round bars and 5 V-shaped grooves

 

Corrosion-resistant-and-long-life-materials
 
Corrosion-resistant and Long-life Materials
 
Material is glass fiber reinforced plastics which has strong corrosion resistance, one-time forming, reinforced design, long service life and high temperature resistance.
 
Salt-solution-mixing-system
 
Salt Solution Mixing System
 
A salt water stirring system is installed in the salt water tank, which can not only stir the salt water to maintain uniformity, but also heat the salt water to stabilize the pH value.
 
Environmentally-friendly-heat-insulation-treatment
 
Environmentally Friendly Heat Insulation Treatment
 
The insulation layer at the bottom of the test chamber is made of clay board, which can efficiently heat insulation and is environmentally friendly.
 

More detail about Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd Testing Instruments Kuala Lumpur (KL), Industrial Supplies Selangor, Measuring Equipment Supplier Malaysia, Penang ~ Redmark Industry Sdn Bhd
Contact Us flagMalaysia