Multifunction Wet Abrasion Scrub Tester with Image Recognition

Multifunction Wet Abrasion Scrub Tester with Image Recognition

Category: Abrasion Available
For more information, visit our official website at lnbtec.com

Description

Introduction: For the wet abrasion scrub of architectural coatings and related products, it is generally defined that the end point of the test is that the coating is abraded to a certain length: the inner wall coating is exposed in the 100mm coating area in the middle of the test panel, and the outer wall coating and ASTM 2486 method are that the damaged length exceeds the shim width (12.7mm). To accurately determine the end point of the test, it is not only necessary for the operator to have a preliminary prediction of the wet abrasion scrub times of the test samples, but also for them to be able to accurately identify the length of the abraded coating. However, it is quite difficult in actual operation.

       BGD 528/S Multifunction Wet Abrasion Scrub Tester is equipped with the function of automatically identifying and calculating the length of the test sample from being abraded to the substrate (exposed bottom). It can monitor the wet abrasion scrub of the samples of two channels at the same time, no need to look at the sample on site. Once the exposed length of the test sample reaches the "threshold" set by the operator, the instrument will automatically stop and record the current scrub times, so as to truly achieve unattended. In addition, the operator can also browse the actual pictures of the test panel after scrubbing for any number of times, and can export the pictures to the U disk for checking.

       Features:

       ◆ Double working channel, each channel can measure the length of the exposed bottom visually.

       ◆ Microsoft surface is used as the control computer, equipped with a 10.5-inch touch screen, which can display clearly and run smoothly.

       ◆ Adopt silent structure design, the running speed is stable and uniform, and the test results are reliable.

       ◆ The user can freely set the flow rate of the washing liquid and precisely control it through the peristaltic pump.

       ◆ It is very convenient to load and unload the test panel and replace the abrasion head of different standards.

       ◆ All machine is made of aluminum alloy, which is beautiful, firm and durable.

■ Speed: the setting range is (5~95) times/min, and the visual detection range is (5~60) times/min

■ Stroke length: 0~300mm (adjustable), can meet different test requirements

■ Range of count: 0~99,999 times

■ Capacity of liquid container: 550mL×2

■ Power: AC 110V/220V, 50Hz/60Hz

■ Overall size (W×D×H, mm): 550×570×800

■ Net weight: 60 KG

 Ordering information: 

    BGD 528/S---Multifunction Wet Abrasion Scrub Tester with Image Recognition

More detail about LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
LUX & BRILLIANCE TECHNOLOGIES SDN. BHD. Measuring Equipment Wholesaler Malaysia, Coating Instruments Supplier Penang, Hardware Tools Supply Kuala Lumpur (KL), Selangor ~ LUX & BRILLIANCE TECHNOLOGIES SDN. BHD.
Contact Us flagMalaysia