| Model No. | MTH-080Y | ||||||
| Inner chamber size(cm) | 40×50×40 | ||||||
| Temperature range | -70℃，-60℃, -40℃, -20℃, 0℃~150℃，other temperature can be customized | ||||||
| Humidity range | 20%RH～98%RH(10%RH～98%RH 5%RH～98%RH)can be customized) | ||||||
| Temp.humi.fluctuation | ±0.3℃；±0.5%RH | ||||||
| Temp.humi.uniformity | ±2℃；±3%RH (empty load, 30 minutes after stablization) | ||||||
| Temp.humi.resolution | 0.01℃；0.1%RH | ||||||
| Heating&cooling time ℃/min | Heating rate 3℃/min, cooling rate 1℃/min(average rate, non-linear change) | ||||||
| Exterior chamber material | Cold-rolled plate + Powder coating | ||||||
| Interior chamber material | SUS#304 Stainless steel | ||||||
| Insulation material | PU | ||||||
| Circulation system | Centrifugal fan air circulation system | ||||||
| Heating system | SUS# Stainless steel high-speed heater | ||||||
| Humidification system | Electrothermal steam humidification | ||||||
| Dehumidifying | ADP critical dew point cooling / dehumidifying method | ||||||
| Refrigeration system | Compressor + Finned evaporator + Air(Water) cooled condenser | ||||||
| Controlling system | Touch screen controller+SSR+PID | ||||||
| Other components | Vacuum glass observation window | ||||||
| Test hole (50mm) | |||||||
| Control status indicator | |||||||
| Interior light | |||||||
| Loading shelf (2pcs, height adjustable) | |||||||
| Safety protection device | Overheat protection circuit breaker | ||||||
| Humidification system overheat protection | |||||||
| Compressor overload protection | |||||||
| Control system overload protection | |||||||
| Overload indicator | |||||||
| Phase sequence protection | |||||||
| Water shortage protection | |||||||
| High voltage and low voltage protection | |||||||
| Over-temperature protection | |||||||
| Water supply delay protection | |||||||
| Fan overcurrent protection | |||||||
| Power supply | AC 1Ψ 220V 50Hz | ||||||
| Customization service | Non-standard or special requirements can be customized. | ||||||
Ess chamber is used to materials' performance with a very fast temperature change rate, the goal to improve the quality of customers' products. It can help make some improvements in product reliability and quality. The users can through many high-temperature alternating cycles to test product performance, and confirm the anti-aging ability of the product, diagnose the service life of the product, so as to achieve the purpose of improving the quality of the product. We are available with 3-20℃ ramp rate, including linear and nonlinear cooling and heating changes.
Ess chamber usually is applied in aerospace, communication, automotive, electronics product, etc.
| Model | MICT-080Y | |||||
| Inner chamber size(cm) | 40×50×40 | |||||
| Exterior chamber size (cm) | Depends on chamber design | |||||
| Testing temperature range | ’-70℃～150℃(KS)；-40℃～150℃(KL)；-20℃～150℃(KR) | |||||
| Rapid-rate temperature range | -55℃～+85℃；-40～+80℃；-20～+80℃； 0～+80℃ | |||||
| Temperature gradient | 3℃/min, 5℃/min, 8℃/min, 10℃/min, 15℃/min, 20℃/min (linear or non-linear,empty loading),customization is available | |||||
| Temp. fluctuation | ±0.3℃ | |||||
| Temp. uniformity | ±2℃(empty loading after stabilizing for 30 mins) | |||||
| Temp. resolution | 0.01℃ | |||||
| Exterior chamber material | Cold-rolled plate + Powder coating | |||||
| Interior chamber material | SUS#304 Stainless steel | |||||
| Insulation material | PU+ fiberglass wool | |||||
| Circulation system | Centrifugal fan air circulation system | |||||
| Heating system | SUS# Stainless steel high-speed heater | |||||
| Refrigeration system | Compressor + Finned evaporator + Air(Water) cooled condenser | |||||
| Controlling system | Touch screen controller+SSR+PID | |||||
| Other components | Vacuum glass observation window | |||||
| Test hole (50mm) | ||||||
| Control status indicator | ||||||
| Interior light | ||||||
| Compartment shelf (2 freely adjustable) | ||||||
| Safety protection device | Overheat protection circuit breaker | |||||
| Compressor overload protection | ||||||
| Control system overload protection | ||||||
| Overload indicator | ||||||
| Phase sequence protection | ||||||
| High voltage and low voltage protection | ||||||
| Over-temperature protection | ||||||
| Fan overcurrent protection | ||||||
| Power supply | AC 3Ψ380V 60/50Hz (another power supply is optional) | |||||
| Customization service | Non-standard or special requirements are all welcome | |||||
More detail about Obsnap Instruments Sdn. Bhd.
Malaysia
