Sintering Furnace LT 02/13 CR

The sintering furnace LT 02/13 CR is perfectly suited for sintering of cobalt-chromium restorations. The blanks are placed in a special sintering bell and will be heat-treated under argon. The specific design in combination with sintering pearls provides for good sintering results in a nearly oxygen-free atmosphere at very low argon consumption. The system is open and can be programmed for various materials up to sintering temperatures of 1300 °C. Two pre-installed sample programs, which can be adjusted individually. Furthermore, the sintering furnace LT 02/13 CR is designed for a single-phase connection.  

• Tmax 1300 °C
• Working temperature up to 1280 °C, depending on the CoCr material
• Single-phase connection
• Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
• Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used
• Gas supply system with 2 solenoid valves and 2 flow meter
• Forced cooling system with compressed air possible
• Sintering bell with good sealing for sintering up to 30 single crowns under argon
• Sintering pearls, Ø 1,25 mm (200 g) included in delivery scope
• Special tongs included in the delivery scope
• Type S thermocouple
• Freely programmable controller C550 allows for automatic temperature control and switching of the gas flow
• Switching system with solid-state-relays to switch the heating
• Possibility to set two gas quantities for optimal adjustment to the sintering process
• Controller with touch operation C550 (10 programs with each 20 segments)
• MyNabertherm App for online monitoring of the firing on mobile devices for free download
• Freeware NTEdit for convenient program input via MS Excel on the PC
• Freeware NTGraph for evaluation and documention of firings using MS Excel on the PC
• NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
• Defined application within the constraints of the operating instructions

Additional equipment

• Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
• Process control and documentation via VCD software package for monitoring, documentation and control