WEBERFILL FINE GROUT -SP
Category: BUILDING MATERIALS
Purchasable on official site
Description
During tiling allocate minimum joints of 2mm wide for wall tiling & 3 mm wide for floor tiling.
Allow adhesive bed to set 24 hours before grouting commences.
Ensure that joints are dry, clean or free of contaminants.
Mix weberfill fine grout with Clean Water (or webermix GT-mix I) as per the recommended mix ratio.
Mechanical mixing is recommended to obtain a uniform coloured mortar. Ensure pigments are thoroughly dispersed during mixing.
Apply grout into joints using a grout float / rubber squeegee,ensuring joints are fully compacted with grouting mortar.
Apply to small areas at time; and clean excess or residue grout promptly using a damp cloth or sponge; before it dries out.
When grout is sufficiently firm, polish tile surface with a clean dry cloth to remove grout film / haze.
Allow grout to set for 24 - 48 hours.
More detail about CHENG HUAT HARDWARE (SENTUL) SDN BHD
