Transparent Protecting Acrylic Coating
Obaproof Slate-Seal 800 is a specially formulated colourless protective coating with added Ultra Violet (UV) additive for treatment of interior and exterior concrete surfaces against scratching. Obaproof Slate-Seal 800 suited for slate, quarry and paver tile, stamped concrete and concrete tile.
Uses:
Bricks, slate, paver, stones, tiles, cementitious substrates.
Direction for use:
1. All surfaces must be dry, clean free from dust, grease and efflorescence.
2. Repair chip-off or concrete surfaces and make sure surface free of water.
Application:
Using brush, roller or spray-on evenly to all the dry and dust free surfaces.
For normal application 2 coats are sufficient. However 3 coats may be required for heavy-duty driveway.
Coverage:
7m?/litre
Drying time:
• Touch dry: 45min.
• Top coat: 2 hours
Advantages:
• Good adhesion.
• Dust-proof.
• Durable and excellent abrasion resistance for light traffic.
• Excellent weather resistance.
• Fast-drying.
• Excellent toughness.
• Low viscosity.
• Good penetration.
• Non-yellowing.
• Waterproofing.
• Not easy to be tainted.
• Chemical resistance.
• Service temperature (5°C-50°C).
Note:
Obaproof Slate-Seal 800 cannot be applied to wet or damp surfaces.
