CONTROLLER SERIES
Two Channel Standard Digital Controller
Two Channel Standard Digital Controller

 

Two Channel Standard Digital Controller

SEM Equipment Sdn. Bhd. flag
Category: CONTROLLER SERIES Available
For more information, visit our official website at sem-eq.com
Visit Official Site Contact Us
Description



The primary function of the controller is to supply power to the light source while managing its brightness and on/off status.
Additionally, the controller can enable the light source to strobe by receiving a trigger signal, significantly extending its lifespan.
The digital controller also supports remote operation via PC equipment, allowing workers to select the appropriate controller type based on specific production needs.


Model : 
 

 

Features : 
 

Dimension :


 

Parameters : 
 
Project Parameter Illustrate
Control method Constant current -
Input voltage 100-220VAC -
Output voltage range DC14V~24V -
Number of channels 2 channels -
Manual adjustment Have Adjust by key
Remote adjustment Have Adjustment through host computer software
Brightness level memory Have After adjustment is completed, it will be automatically memorized after 8 seconds.
RS232 communication baud rate 9600 -
Adjustable brightness level Level 255 Long press the button for coarse adjustment, short press for fine adjustment: it can also be adjusted through the host computer software
Single channel output maximum power 30W -
External trigger method Passive trigger, high and low level trigger switchable Effective trigger voltage range: 5-24V DC
External trigger delay time L, ON-OFF<60us H, represents high level trigger;
H, OFF ON <60us L, represents low level trigger;
L, ON-OFF<80us ON and OFF represent LED
L, OFF ON <80us The on and off state of the light source
External trigger frequency <1/T Determined by the strobe time, if T=1 ms, the maximum external trigger frequency is 1KHz
Working environment Temperature-10~50℃ -
Humidity 20~80%RH non-condensing -
Storage environment Temperature-20~70℃ -
Humidity 10~55%RH non-condensing -
Standby power consumption <3W -
Overall dimensions (mm) 128X 85X 158mm L × W × H
Weight 0.9Kg -


Technical Indicators :
 
Model Number of channels Power/CH Output voltage external trigger
KM-DCS2.0-2C012W-24PS 2 12W  24V Have
KM-DCS2.0-2C030W-24PS 2 30W 24V Have
KM-DCS2.0-2C060W-24PS 2 60W 24V Have

More detail about SEM Equipment Sdn. Bhd.
SEM Equipment Sdn. Bhd.
SEM Equipment Sdn. Bhd. Industrial Equipment Manufacturer, Ultrasonic Equipment Supplier, Laser Equipment Supply in Johor Bahru (JB), Malaysia ~ SEM Equipment Sdn. Bhd.
Contact Us flagMalaysia