Bret CN70B Coil Air Nailer Gun 2 -1/2" [Code: 10030]: Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam Mymesin Machinery & Hardware Sdn Bhd

Specifications

Instruction: Air nail guns usually use straight nails to shoot into the material surface. Therefore, when using, users should install the nail tape in the correct direction according to the nail tip (30 degree angle) to ensure safety when using, to avoid nails shooting into the feet or into the person. Place the gun tip on the surface you intend to nail: hold the nail gun firmly with both hands: one hand on the trigger, one hand on the body of the gun. When the nail gun is working, you need to hold the gun firmly because when shooting, the gun will cause a force to bounce back. If you don't hold it firmly, it can bounce back at you. Push the nail gun tip close to the surface to be nailed, apply pressure to the machine: Do not put your chest or stomach on the end of the machine to apply pressure. This can cause serious injury. Squeeze the trigger firmly to ensure the gun is safe. To ensure longevity and improve performance of the nail gun, users should add a few drops of oil to the air inlet before using it every morning.

Description

*Nail gun can shoot nail length*	*50, 57, 64 and 70mm*
*Nail shaft diameter*	*Ø2.3 - Ø2.9mm*
*Nail cap diameter*	*Ø5.7 - Ø7.0mm*
*Number of needles*	*225 - 300 nails/roll*
*Working pressure*	*6 - 8 Kgf/cm2*
*Size*	*336x141x318mm*
*Weight*	*3.84 Kg*
*Accessories included:*	*Hex key*
*Manufacturer*	*BRET*
*Origin*	*China*