Tenmars YF-303 Analog Multimeter

Tenmars YF-303 Analog Multimeter

Category: Analog Multimeter Available
For more information, visit our official website at mtmpre.com.my

Description

YF-303   Analog Multimeter

 

Application

•ndication of zero correction:
 Before measuring, place the pointer on zero position of the scale left by adjusting the screw of zero corrector.
•Range selection:
 When measuring an unknown value of voltage or current, start from the highest range, then adjust to a proper lower range. Measurement is more accurate as near to the full scale, for resistance measurement, near to the middle scale.
•OFF range:
 After measurement place range selector to OFF range. This is to prevent pointer from swaying and to protect multitester.

 

Features


Specifications


MEASUREMENT RANGES AND PERFORMANCE
As a transistor tester
Leakage current
(iceo)(LI)
0-150μA atx1K range
0-15mA atx10 range
0-150mA atx1 range
±5% of arc Current across terminals
DC current
amplification factor(hFE)
0~1000 at x 10 range  ±3% of arc With connector extra

As a circuit tester
Measurement Measurement ranges Allowance Remarks
DC Voltage
(DCV)
0-0.3V-3V-12V-
30V-120V-300V-1200V
Battery 1.5VCheck 0-1.5V
±3% fs Input impedance 20KΩ/V
AC Voltage
(ACV)
0-6V-30V-120V-300V-1200V ±4% fs Input impedance 8KΩ/V
DC Current
(DCmA  A)
0-0.06m A(60μA)-3m A-
30m A-0.3A-12A,
0.06m A at 0.3V DC position
±3% fs Voltage drop 300m V
Resistance
(Ω)
 •Range
 x1-x10-x1K-x10K
 •Minimum
 0.2-2-200-2K(Ω)
 •Midscale
 20-200-20K-200K(Ω)
 •Maximum
 2K-20K-2M-20M(Ω)
±3% of arc Internal
batteries
UM-3x2 006Px1
AF output
(dB)
 -10dB-+17dB at AC6V   position 0dB/0.775V
 (1mW through 600Ω)
 -10dB-+63dB
 (ACV all ranges)
±4% fs 8KΩ/V for
out put terminal


 

More detail about MTM Precision Sdn Bhd
MTM Precision Sdn Bhd
MTM Precision Sdn Bhd Surveying Instruments Selangor, GPS Systems Supply Kuala Lumpur (KL), Total Stations Supplier Malaysia ~ MTM Precision Sdn Bhd
Contact Us flagMalaysia