The FW Bell 8010 Single Channel Gauss/Tesla Meter leads the way for advanced Hall Effect magnetic measuring technology. The easy-to-use front panel programming feature incorporates the latest in user control operations. And the 8010 is capable of measuring and displaying seven different parameters, including flux density, frequency, temperature, min, max, peak and valley.
This high accuracy instrument is fully equipped to meet most magnetic measuring applications. Bell's dynamic probe correcting software increases the 8010 measurement capabilities to make it the most versatile magnetic measuring tool in the world.
Features:
Specifications:
|
Ranges *Low field probe † High field probe |
300mG (30μT)* 3kG(300mT) 3G (300μT)* 30kG (3T) 30G (3mT) 300kG(30T)† 300G (3OmT) |
|
| Resolution | 1 μG (0.1nT) to 1G (0.1mT) {Dependent on Probe Type Used} | |
| Accuracy (Displayed reading) |
DC basic AC basic |
±0.05% of reading ±2% of reading |
| Frequency range |
DC mode AC mode |
dc to 250Hz 20Hz to 50kHz |
| Accuracy (Corrected analog output) |
DC basic AC basic Frequency range |
±0.1% of range ±2% of range dc to 500Hz |
| Frequency range (Uncorrected analog output) |
DC mode AC mode |
dc to 100Hz 10Hz to 50kHz |
| Analog output |
Output voltage Source impedance Connector |
±3V FS. or ±10V F.S. or adjustable from 0.1 – 9.9V <100 ohms Standard female BNC |
| Additional influences | Temperature coefficient | ±(0.02% of reading ±1 count)/°C |
| Temperature range |
Operating Storage |
0°C to +50°C -20°C to +60°C |
| Front panel display | WVGA, 600 x 480 pixels, TFT Color LCD Display with Backlighting. (6.5" diagonal viewing area) | |
| Communication ports |
RS-232 Baud rate IEEE-488 Protocol Protocol Ethernet USB |
Standard 9-pin female "D" connector 300,1200,2400,4800,9600,19200,38400, 57600,115200 bits/sec Standard 24-pin GPIB connector Protocol IEEE-1987.2 and SCPI-1999 IEEE-802.3u Data Link Layer & TCP/IP Transport & Network Layer Standard RJ-45 connector Version 1.1 full speed |
| Power |
Volts: 100/120 or 220/240 Frequency: 50-60 Hz or 50-60 Hz Current: 1.O A (max) or 0.5 A (max) |
|
Malaysia
