MG12XU

Category: MG Series Analog Mixing Consoles Available
For more information, visit our official website at hiumusical.com

Description

                                            YAMAHA MG12XU FEATURES

Mixing capability On-board processors SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
I/O Phantom power +48 V
Digital I/O USB Audio Class 2.0 compliant, Sampling Frequency: Max 192 kHz, Bit Depth: 24-bit
Input Channels Mono[MIC/LINE] 4
Mono/Stereo[MIC/LINE] 2
Stereo[LINE] 2
Output Channels STEREO OUT 2
MONITOR OUT 1
PHONES 1
AUX SEND 2
GROUP OUT 2
Bus Stereo: 1, GROUP: 2, AUX: 2 (incl. FX)
Input Channel Function PAD 26 dB (Mono)
HPF 80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP 1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID Gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking
EQ LOW Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter 2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]

                                              General specifications

Total harmonic distortion 0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min
Frequency response +0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
Hum & noise level Equivalent input noise -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Residual output noise -102 dBu (STEREO OUT, STEREO master fader: Min)
Crosstalk -78 dB
Power requirements AC 100 – 240 V, 50 / 60 Hz
Power consumption 22 W
Dimensions W 308 mm (12.1')
H 118 mm (4.6')
D 422 mm (16.6')
Net weight 4.2 kg (9.3 lbs.)
Accessories Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Cubase AI Download Information, Optional Accessory: Rack-mount kit RK-MG12, Foot Switch FC5
Others Operating Temperature: 0 to +40˚C


 

                              MG12XU Analog Input Characteristics

Input terminal PAD 
26 dB
GAIN Trim 
Position
Actual Load 
Impedance
For Use With 
Nominal
Input level Connector
Sensitivity *1 Nominal Max. before clip
MIC/LINE 
1 – 4
OFF +64 dB 3kΩ 50-600Ω 
Mics/Lines
-80 dBu 
(0.077 mV)
-60 dBu 
(0.775 mV)
-40 dBu 
(7.75 mV)
Combo 
jack*2 
(Balanced)
+20 dB -36 dBu 
(12.3 mV)
-16 dBu 
(122.8 mV)
+4 dBu 
(1.228V)
ON +38 dB -54 dBu 
(1.55 mV)
-34 dBu 
(15.46 mV)
-14 dBu 
(154.6 mV)
-6 dB -10 dBu 
(245 mV)
+10 dBu 
(2.451 V)
+30 dBu 
(24.51 V)
MIC 
5/6, 7/8
+64 dB 3kΩ 50-600Ω 
Mic
-80 dBu 
(0.077 mV)
-60 dBu 
(0.775 mV)
-40 dBu 
(7.75 mV)
XLR-3-31 *3
(Balanced)
+20 dB -36 dBu 
(12. 3 mV)
-16 dBu 
(122.8 mV)
-6 dBu 
(388.2mV)
LINE 
5/6, 7/8
+38 dB 10kΩ 600Ω 
Lines
-54 dBu 
(1.55 mV)
-34 dBu 
(15.46 mV)
-14 dBu 
(154.6 mV)
Phone jack *5 
(Unbalanced)
-6 dB -10 dBu 
(245 mV)
+10 dBu 
(2.451 V)
+30 dBu 
(24.51 V)
LINE 
9/10
10kΩ 600Ω 
Lines
-30 dBu 
(24.5 mV)
-10 dBu 
(245 mV)
+10 dBu 
(2.45 V)
Phone jack *5 
RCA Pin 
(Unbalanced)

                            MG12XU Analog Output Characteristics

Output Terminals Actual source 
impedance
For Use With 
Nominal
Output level Connector
Nominal Max. before clip
STEREO OUT [L, R] 75Ω 600Ω Lines +4 dBu 
(1.228 V)
+24 dBu 
(12.28 V)
XLR-3-32 *3 
Phone jack *4 
(Balanced)
MONITOR OUT [L, R] 
GROUP OUT [1, 2]
AUX SEND [1, 2]
150Ω 10kΩ Lines +4 dBu 
(1.228 V)
+20 dBu 
(7.750 V)
Phone jack *4 
(Impedance Balanced)
PHONES 110Ω 40Ω Phones 3mW + 3mW 100mW + 100mW Stereo phone jack


More detail about HMI Audio Visual Sdn Bhd
HMI Audio Visual Sdn Bhd
HMI Audio Visual Sdn Bhd Musical Instrument supplier Johor Bahru, JB, Lighting & Karaoke System ~ HMI Audio Visual Sdn Bhd
Contact Us flagMalaysia