HS-2

Category: Diffusions Pumps Available
For more information, visit our official website at elsotech.com.my

Description

Available in 2 in. and 16 in. through 35 in. sizes, the low-cost HS-series pumps provide high speed, low ultimate pressure, high throughput, high tolerable forepressure, and low backstreaming. The HS-Series diffusion pumps come with full thermal protection and optional quick-cool coils. The 16 in. through 35 in. pumps come with sight glass/fill and drain assemblies, and are available with ASA or ISO flanges.

Technical Specifications

Pumping speed, operating range Pumping speed, AVS 4.1 (1963) 160 l/s air, 200 l/s He and H2 285 l/s air
Maximum Throughput 0.60 T-l/s (0.80 mbar-l/s) in operating range, 0.70 T-l/s (0.93 mbar-l/s) @ 0.01 Torr
Operating Range 3.7 x 10-3 to < 5 x 10-8 Torr, (4.9 x 10-3 to < 6.5 10-8 mbar)
Maximum Forepressure No load: 0.55 Torr (0.71 mbar) Full load: 0.40 Torr (0.52 mbar)
Recommended Backing Pump ≥ 5 cfm (8.5 m3/hr)
Backstreaming Rate, Standard Cold Cap < 1 x 10-3 mg/cm2/min
Warmup Time 15 minutes
Cooldown Time 10 minutes (with quick cool coil)
Fluid Charge 100 cc
Electrical Requirements 1 ph, 50/60 Hz, 120/240 VAC
Pump Power 450 watts
Cooling Water Requirements 0.1 gpm (20 l/hr) at 60-80 °F (15-26 °C)
Water Connections ⅛ in. FPT

 

Speed Curve Graph

HS-2 Diffusion Pump Speed Curve GraphPumping Speed Throughput

Outline Drawing

HS-2 Diffusion Pump Outline Drawing

Description Wt. kg (lbs) Part Number
HS-2 Pumps   ASA
With standard cold cap 20.0 (9.0) 82906301
With standard cold cap 20.0 (9.0) 82906302
Accessories Part Number
Water-cooled baffle with ASA flanges 10.0 (4.5) F9453302
Santovac 5 diffusion pump fluid, 500 cc pump fluid, 500 cc 2.5 (1.1) 695405005
DC-702 diffusion pump fluid, 500 cc 3.0 (1.4) 695472005
DC-704 diffusion pump fluid, 500 cc 3.0 (1.4) 695474005
DC-705 diffusion pump fluid, 500 cc 3.0 (1.4) 695475005
Instruction manual   699901150
Replacement Parts (one heater required per pump)
350 W, 120 V heater (HS2A) 1.0 (0.5) 647301100
350 W, 240 V heater (HS2A) 1.0 (0.5) 647301125
450 W, 120 V heater 1.0 (0.5) 647302125
450 W, 240 V heater 1.0 (0.5) 647302150
Heater block (one required per pump) 1.0 (0.5) 82920001
Heater platen (one required per pump) 1.0 (0.5) 82918301
Replacement o-ring kit, (5 Inlet flange o-rings (butyl 2-338)) 1.0 (0.5) K0377159
 

More detail about ELSO Technologies Sdn Bhd
ELSO Technologies Sdn Bhd
ELSO Technologies Sdn Bhd Test & Measurement Equipment Distributor Penang, Malaysia, NetAlly, Rigol, Cromwell Distributor Singapore, Selangor, KL, Sarawak ~ ELSO Technologies Sdn Bhd
Contact Us flagMalaysia