Fire Rated Intumescent Coat [For Structural Steel]
Features
*Up to 2 hour fire rating.
*Durable and decorative finish.
*Fast drying time.
*Green Label Product.
*Bomba Certification [Malaysia Fire Department]
Details
Suitable for structural steel used as primer.[Apply directly to contour of primed I and H section columns, angles, channels and beams and hollow sections.
It can be sealed and protected with a decorative water based top coat.
Need advice from specialist applicator on the method of application.
| Theoritical Coverage | 1mm WFT = 0.7mm DFT [Dry film Thickness] = 1 litre per SqM , 1mm = 1000μm[microns] |
| Surface Burning | Flame spread 5, smoke development 35 when tested to ASTM E84. |
| Durometer Hardness | 80 shore D when tested to ASTM D2240. |
| Initial Set | Approx 6 hours at 20'C and 50% RH for 0.4mm WFT. |
| Impact Resistance | 18 kg/m when tested to ASTM D2794. |
| Fire Resistance | Structures protected with the coat have undergone fire resistance tests at approved independant laboratories to recognised standards throughout the world including: - UK [BS476 : Part 21 : 1987] - Canada and USA [ASTM E119 and ASTM E84] - Australia [AS1530 : Part 4] Assessed in accordance with ASFP 'Fire protection for structural steel in buildings' procedures. |
| Storage | - Indoors in dry conditions between 10'C and 38'C. - Protect from frost, excessive heat [above 45'C] and strong radiant sunlight. |
| Shelf Life | Maximum 10 months in original sealed containers. |
| Environmental | Do not discharge into drains, watercourses or soil. |
| Main Raw Material | Polyvinyl Acetate Resins and Filler |
| Usage | Appliance Paint, Building Coating, Structural Steel |
| Application Method | Air Spray and Roller |
| Colour | White |
| Finish | Flat Matt Finish |
| Max Thickness Per Coat | Wet film thickness at 1.6mm [Spray] , 0.76mm using brush |
| Practical Coverage | Depend on surface texture, substrate, application method and technique |
| Theoritical Coverage | Approx 18.79 SqM per container[1mm per litre] |
| Cure | By air drying |
| Abrasion Resistance | 0.6505g per 1000 cycles when tested to ASTM D4060 |
| Solid by Weight | 70% ± 2% |
| Density | 1.33 kg/litre |
| pH Value | 8.0 ± 0.2 at 25'C |
Malaysia
