Description
The SplashGard™ system is a specialized coating system designed to easily adhere to wet steel surfaces and prevent corrosion. It is comprised of SplashBond™ Adhesive undercoating and Splash Wrap fiberglass cloth outerwrap, impregnated with moisture cured urethane (MCU) resin. The SplashGard™ system not only resists wave action and corrosion, but can also be applied underwater to provide structural reinforcement – perfect for use on risers.
Technical Specs
|
Mechanical Properties Attribute Tensile Strength Method ASTM D3039 Value 51,800 psi Attribute Tensile Modulus Method ASTM D3039 Value 3.01 x 106 psi Attribute Poisson's Ratio Method ASTM D3039 Value 0.077 |
Thermal Properties Attribute Thermal Expansion Method ASTM E831 Value 10.2 μm/m/°C Attribute Heat Distortion Temperature Method ASTM D648 Value 205 °C Attribute Max Operating Temperature Method ASME PCC-2 Value 185 °C Attribute Application Temperature Value -50°F to 120°F -46°C to 49°C |
|
System Properties Attribute Ply Thickness Value 22 mils (0.022 inches) Attribute Working Time Value 20 – 30 minutes Attribute Set Time Value 2 hours Attribute Cure Time Value 24 hours Attribute Shelf Life Value 1 year with proper storage Attribute Stocked Sizes Value From 2" X 12' to 12" X 90' |
 |
1. Surface Preparation Remove all soft coatings and media blast the pipe to provide an anchor pattern (NACE 1 preferred). On dry surfaces, wipe the surface with a solvent such as Acetone, Toluene, or MEK. For structural repairs, mix and apply filler putty or paste to any defects. |
 |
2. Apply SplashBond Mix equal parts of the SplashBond™ Epoxy Primer until uniform. Apply the primer to the pipe surface as instructed. Allow the primer to sit until a “peanut butter” thickness is achieved. |
 |
3. Apply SplashWrap Follow the wrapping instructions for Pipe Wrap™ or A+ Wrap™, as applicable for the repair. |
 |
4. Apply SplashBond Outer Coat Allow the material to cure. Then, mix and apply a coating of SplashBond™ as an outer coating. |
Malaysia
