i-Vu® UC Open XP IO OPN-UCXPIO: 马来西亚的首选 United Faith Sdn Bhd

详情

General Purpose Controller

Adds additional I/O point capacity to the OPN-UCXP controller. 16 inputs/8 outputs. Universal programmable controller provides auxiliary building control to interface with air handlers, chiller plants, hot water systems, lighting, and other HVAC equipment.

The UC Open XP IO expander adds additional I/O point capacity to the UC Open XP Controller. These controllers provide auxiliary building control to interface with air handlers, chiller plants, hot water systems, lighting, and other HVAC equipment. The UC Open XP’s factory engineered control programs provide simple building integration for commercial applications with 24 I/O point capability. When the UC Open XP IO expander is added to the UC Open XP controller, up to 24 additional I/O points are available. Together, these controllers support up to 48 total I/O points for even greater flexibility.

Application Features

Comprehensive library of factory-engineered control programs available for air and water systems, including: CV and VAV AHU control, WSHP loop control (boilers/towers/pumps), chiller plant control, hot water systems, lighting control, metering, and network data sharing
Supports Snap graphical programming for creating customized control programs
Supports Carrier communicating room sensors, which allow for local setpoint adjustment and local overrides

Hardware Features

Expands the UC Open XP Controller to support up to 48 I/O points
Removable screw terminals for I/O connections
Versatile mounting options: may be mounted directly onto the UC Open XP enclosure or separately within the mounting enclosure

System Benefits

Integrated Carrier linkage algorithm for plug-and-play integration with Carrier systems
Fully plug-and-play with the Carrier i-Vu Building Automation System
Supports demand limiting for maximum energy savings

Communication Ports	Xnet Remote Expansion port: For connecting to a UC XP Controller via the Xnet network.
Inputs	8 binary inputs: Inputs 1-8 are binary only and support pulse counting up to 10 Hz. 8 analog inputs: Inputs 9-16 are universal inputs, jumper selectable between thermistor/dry contact and 0-5VDC. All analog inputs have 10 bit A/D resolution.
Outputs	8 binary outputs: Configured as dry contact, normally open, and must be powered from a Class 2 power source.
Protection	Incoming power and network connections are protected by non-replaceable internal solidstate polyswitches that reset themselves when the condition that causes a fault returns to normal. The power, network, input, and output connections are also protected.
Status Indicators	LED status of power, outputs, running and errors.
Listed By	UL916 (Canadian Std. C22.2 No. 205-M 1983), CE, FCC Part15-Subpart B - Class A
Environmental Operating Range	Operating: -20° to 140°F (-29° to 60°C), 10-90% relative humidity, non-condensing Storage: -20°F to 140°F (-29° to 60°C), 10-90% relative humidity, non-condensing
Power Requirements	24VAC +/- 10%, 50-60Hz 13VA power consumption 26VDC (25V min, 30V max) Single Class 2 source only, 100VA or less
Dimensions	Length: 10-5/8” (26.9 cm) Width: 3” (7.6 cm) Depth: 1-1/2” (3.8 cm) Weight: 0.73 lbs (0.33 kg)

更多 United Faith Sdn Bhd 相关资料