Yamada DP-10BPN: 马来西亚的首选 Merns (M) Sdn Bhd

详情

Nominal diameter		3/8 ″ (10A)
Material connection	Inlet	Rc3 / 8
	Discharge port
Air connection	Supply port	Rc1 / 4 (with air cock)
	exhaust port	Rc3 / 8 (with muffler)
Service air pressure		0.2 to 0.7 MPa
Discharge pressure		0.7MPa
Discharge rate / cycle		50mL
Slurry limit (maximum passing particle diameter)		1mm or less
Mass		DP-10BA □: 3.5kg DP-10BS □: 5.2kg DP-10BP □: 3.0kg

DP-10BA □ series uses nylon (PA) as the material for the valve receiver. Pay attention to corrosion resistance. Not suitable for MEK etc.

Please download the parts exploded view and parts list from the data download page →Download data

Body (wetted part) material	Diaphragm material
Body (wetted part) material	C: Chloroprene (CR)	N: Nitril Gum (NBR)	T: Fluorocarbon resin (PTFE)
A: Al alloy (ADC12)	DP-10BAC (851743)	DP-10BAN (851742)	DP-10BAT (851725)
S: Stainless (SCS14)	DP-10BSC (851746)	DP-10BSN (851747)	DP-10BST (851741)
P: Polypropylene (PPG)	DP-10BPC (851745)	DP-10BPN (852280)	DP-10BPT (851744)

Body (wetted part) material	Diaphragm material
Body (wetted part) material	H: Polyester type thermoplastic elastomer (TPEE)	S: Polyolefin-based thermoplastic elastomer (TPO)	* H / T
A: Al alloy (ADC12)	DP-10BAH (851750)	DP-10BAS (852674)	DP-10BAH / T (851872)
S: Stainless (SCS14)	DP-10BSH (851751)	DP-10BSS (852675)	DP-10BSH / T (851873)
P: Polypropylene (PPG)	DP-10BPH (851752)	DP-10BPS (852676)	DP-10BPH / T (851874)

* H / T is Diaphragm: Polyester thermoplastic elastomer (TPEE), Ball: Fluororesin (PTFE).
Note) Clicking the model / product number will display the parts list and parts exploded view.
Note) Download by right-clicking ''Save Target As'' ''''

Main material

Model	DP-10BA	DP-10BS	DP-10BP □
Ball valve	DP-10B □□ ・・・ Same as diaphragm material
Valve seat	A5056	SUS316	DP-10BPN ... NBR DP-10BPC ... CR Other DP-BP □ ・・・ PPG
Valve holder	PA		PPG
Center disc	A5056		PPG (SUS304 *)

★SUS304insert material ★ Initial self-lifting height is 1m for all models.

The maximum operating pressure of the body wetted part resin type (BP □) depends on the liquid temperature.
Be sure to check the “Liquid temperature and maximum working pressure diagram”.

更多 Merns (M) Sdn Bhd 相关资料