COMET H5521 Remote CO2 concentration with Ethernet interface and two relays: 马来西亚的首选 MOBICON-REMOTE ELECTRONIC SDN BHD

详情

Product Details

CO2 level transmitter with two output relays.

The CO2 measurement is based on a 2-source, 2-beam process. CO2 measurement with long-term stability is guaranteed thanks to the proven non-dispersive infrared (NDIR) CO2 measurement cell. The unique patented auto-calibration procedure compensates for aging of the infrared source and guarantees high reliability, long term stability and eliminates the need of periodical recalibration in the field.

The device is supplied with CO2 probe with 1m cable. Cable lengths 2 or 4 meters available optionally.

The CO2 concentration is shown on the display or signaled by a color LED.

Processing and analysis of measured data:

Code

H5521
Warranty

3 years

TECHNICAL DATA

MEASURED VALUE

CO2

CO2 SENSOR

Measuring range 0 to 10 000 ppm

Accuracy ±(110ppm +5% from reading) at 25°C and 1013hPa

Resolution 1 ppm

RELAY OUTPUTS

Quantity 2

Maximal voltage 50 V

Maximal current 2 A

Maximal power 60 VA

GENERAL TECHNICAL DATA

Operating temperature -30 to +60 °C

Channels 1x external CO2 sensor

Acoustic alarm from built-in beeper - switchable

Output Ethernet

Measuring interval 15 s

Communication protocol WWW, ModbusTCP, SNMPv1, SOAP, XML

Alarm protocols E-mail (SMTP authentication is supported), SNMP Trap, Syslog

Power 9-30 Vdc

Protection class IP30 electronics; IP65 sensors

Dimensions 136 x 150 x 45 mm

External probe cable length CO2 1 meter (optionally 2 or 4 meters)

Weight approx. 360 g

Warranty 3 years

COMET H5521 Remote CO2 concentration with Ethernet interface and two relays

Processing and analysis of measured data:

TECHNICAL DATA

MEASURED VALUE

CO2 SENSOR

RELAY OUTPUTS

GENERAL TECHNICAL DATA