XP-SNet: 马来西亚的首选 NetEon Communication Sdn Bhd

详情

Modular System – Extension Board Based

The system is designed to allow you to extend the capacity by simply adding extension boards onto it. This gives you the cost advantage when you are implementing minor capacity upgrades. Moreover, the extension board based design provides a consistent architecture in the system and thus promotes better maintenance quality by reducing the system learning time.

Centralised connection

The cables are terminated in the controller. This allows faster data processing as transfer of data are all done onboard and the readers are directly connected to the controller.
Centralised connection also promotes better deployment and maintenance quality. The engineers can perform the inspection and service all at one place and this can help to reduce the cost of maintenance operations.

Configurable to Distributed Architecture

Where remote interfacing of door / reader or I/O are required, the controller supports these remote interfacing modules (RIM) that connect to the controller using RS485.
This is a flexible and powerful controller capability that gives you the benefit of both useful centralized and distributed architecture in one box.

Support Door, Lift, Alarm Monitoring

The controller has been built for high end integrated security applications. It can support door access control, car park access control, lift access control and alarm monitoring.
You can configure the capacity of the system by adding extension boards or remote interfacing modules.

32 bit ARM Processor

The controller uses the 32bit ARM RISC processor at 72MHz. This is a powerful processor for industrial applications and it enables the system to process the complex applications in real-time manner.

Onboard IP with Encryption

The controller is equipped with LAN connectivity at 10/100Base-T using TCP/IP protocol.
It supports push based communication to computer for faster data transfer speed.
The IP communication is encrypted using industrial standard AES128 for secured communication.

Remote Firmware Download

Firmware can be downloaded from the application software via the IP interface.
This helps to improve the maintainability of the controller at site. You can update or upgrade the firmware from the computer at site without needing to open the controller box or bring the controller back for service.

No	Item	Features
1.	Max Door	5
2.	Relay Output	8 (5 for Door Relay + 3 General Purpose) Relay Rating: 1A
3.	Sensor Input	16 Supervised (As Door Status or General Purpose)
4.	IP	Yes. LAN 100 Base T
5.	Reader	• MicroEngine Plato Readers : Max 10 (5 Entry + 5 Exit) • Wiegand / ABA Readers : Max 5
6.	Comm Port	Yes. • RS485 to Remote Interface Module • RS485 to Extension Boards
7.	Card Number Length	Up to 16 Digits
8.	Max Card DB	25,000 / 50,000 / 100,000*
9.	Max Transaction DB	100,000 / 100,000 / 200,000*
10.	Time Zone	255
11.	Time Set	255
12.	Floor Zone	255
13.	Global Antipassback	Yes
14.	Interlocking	Yes
15.	Access Mode	1. Card + Pin 2. Card Only 3. Pin Only 4. Facility Code 5. Fingerprint Only 6. Card + Fingerprint 7. Pin + Fingerprint 8. Automatic Lock Release 9. Inhibit Access
16.	IP Messaging Encryption	Yes. AES128.
17.	Alarm Monitoring Support	Yes
18.	Extension	Up to 3 Extension Board : SNet-E5D : 5 Door Extension Board SNet-E32R : 32 Relay Output Board SNet-E248S : 24 Supervised Input & 8 Relay Output Board Max Extension Capacity : 5 Doors / 128 Inputs / 128 Outputs
19.	Support Remote Interface Module	Yes. Use RS485. Door Interface Unit (Max 10) : MK801 Reader Interface I/O Controller (Max 10) : MiO-S168 – 16 Supervised Inputs / 8 Outputs MiO–R16 – 16 Relay Outputs MiO-L32 – 32 LED Driver for Mimic Panel Use Max Remote Capacity : 10 Doors / 160 Inputs / 160 Outputs
20.	Processor	ARM RISC Processor at 72MHz
21.	Power Requirement	12V @ 500mA (Base Board Only)
22.	Onboard LED / Buzzer	Yes
23.	Remote Firmware Update	Yes. Can be done through application software at site.
24.	Controller Package PSU	12VDC @ 5A with 12AH Battery

更多 NetEon Communication Sdn Bhd 相关资料