Elton EWH23 (EV-23) Storage Water Heater Malaysia - Vertical Model: 马来西亚的首选 BWS Sales & Services Sdn Bhd

详情

	1. Stainless Steel Inner Tank: Made of stainless steel of 1.2mm thickness (AISI 304 2 D) which by far is the most recognised material for it's excellent anti-corrosive properties within atmosphere and water. It carries a five (5) years warranty against leakage due to manufacturer's fault.
	2. Mild Steel Inner Tank Made of anti-rust coated cold rolled mild steel of 2mm thickness and incorporated with Magnesium Anode in it's design to provide an around-theclock protection against corrosion. It carries a three (3) years warraty against leakage due to manufacturer's fault.
	3. Magnesium Anode Rod: Made with magnesium alloy and when the anode is electrically connected to the structure to protect, it makes more negative the electrochemcal potential than the structure itself. In this way the structure acts as the cathode and the magnesium alloy rod as the anode (therefore, the name magnesium anode). It is used to protect metallic structures that are in contact with water against corrosion.
	4. Heating Element Made of copper sheathed immersion type that has an electrical rating between 1.5kW- 3.0kW
	5. Thermostat c/w electrical cut-off device : To sense and to monitor the temperature of water in the inner tank between 40° C- 70° C approximately. Besides, it is equiped with a Bimetallic Thermal cut-off device, also called th third safety, which will be activated to cut off electricity supply should there be any malfunction of the thermostat.
	6. Safety Valve cum Non Return Valve : It has dual functions, one is to guard against excessive pressure built-up in the inner tank above 7.58 bar (11Dpsi), the other is to prevent water from the inner tank to flow back.
	7. Wide Range of Capacities : Both Elton and Ignis water heaters have a wide selection of standard capacities of between 3 gallons - 33 gallons to cater to individual requirements. We can also manufacture according to customers' requirements (tailor-made) to meet specific needs and applications both for domestic and commercial purposes.
	8. Easy Installation: Both Elton and Ignis water heaters, irrespective of capacities, can be easilly installated, whether wall-mounting or floor-mounting, vertical or horizontal version. Its unique design totally eliminates the need for vent pipes.
	9. Single I Multiple-Outlets: Both Elton and Ignis water heaters are stored under pressure, the flow of hot water can be diverted to either single or multiple outlets or at different levels.
	10. After Sales Service Being an established manufacturer 1960's, we are responsible and committed to after-sales service as we realize a product especially electric water heater need not only to meet up with buyers' expectation in quality and safety, the after-sales service is equally, if not more important. Our team of experienced technician is always ready to be on call to serve our customers. This is our commitment.

Notes:
1. Electrical parts cany a one (1) year warranty against manufacture' s defects.
2. All the above important component parts are fully imported.

Useful Information

Capacity

Ambient

Heat Up Time

Recommended For

Net Weight (KG)

Ltrs.

Gals.

Temp.

To 40°C

To 45°C

To 50°C

To 55°C

Shower

Long Bath

Jacuzzi

Mild Steel

Stainless Steel

Unladen

Laden

Unladen

Laden

26°C

9 min

12 min

16 min

19 min

Yes

26°C

5 min

10 min

13 min

16 min

Yes

26°C

10 min

14 min

18 min

22 min

Yes

26°C

15 min

20 min

25 min

30 min

Yes

26°C

18 min

24 min

31 min

37 min

Yes

26°C

22 min

30 min

38 min

46 min

Yes

26°C

27 min

36 min

46 min

55 min

Yes

115

107

100

26°C

33 min

44 min

56 min

67 min

Yes

137

129

123

26°C

40 min

54 min

69 min

83 min

Yes

172

155

150

26°C

49 min

66 min

84 min

101min

Yes

207

185

* Other capacities are also available upon request. * ( ü ) Recommended ( X ) Not recommended

Technical Specification
Electrical Loading	:	5 Gal. - 33 Gal. / 3.0kW AC 240 / 50Hz
	:	3 Gal. / 2.0kW AC 240 / 50Hz
Electric Cable	:	3 core VCTF
	:	2.0mm² x 3C x 105°C 300/500V (compliance to SIRIM requirement)
Min. Water Inlet Pressure	:	0.17 bar (2.5 psi)
Max. Water Inlet Pressure	:	2.76 bar (40 psi)
Pipe Size	:	(1) 15mm (½'') dia. Stainless Steel pipe for Stainless Steel inner tank.
		(2) 15mm (½'') dia. Mild Steel pipe for Mild Steel inner tank.
Insulation	:	Fiberglass wool, Thickness : 1'' Density : 1b / ft²
Water Temperature	:	Themostatically controlled between 40°C - 70°C approximately. Max. preset temperature at 70°C.
Thermal cut-off (Third safety)	:	Bellow 99°C - manually resetable.
Safety Valve	:	Pressure release at approximately 7.58 bar (110 psi)
Tested Pressure	:	17.24 bar (250 psi)
Inner Tank	:	(1) Stainless steel AISI 304 2D of 1.2mm thickness.
		(2) Cold rolled steel JIS G3141 of 2.0mm thickness.
Outer Casing	:	Cold rolled steel JIS G3141 of 0.7mm thickness coated with electrostatic epoxy powder.

	1. Stainless Steel Inner Tank: Made of stainless steel of 1.2mm thickness (AISI 304 2 D) which by far is the most recognised material for it's excellent anti-corrosive properties within atmosphere and water. It carries a five (5) years warranty against leakage due to manufacturer's fault.
	2. Mild Steel Inner Tank Made of anti-rust coated cold rolled mild steel of 2mm thickness and incorporated with Magnesium Anode in it's design to provide an around-theclock protection against corrosion. It carries a three (3) years warraty against leakage due to manufacturer's fault.
	3. Magnesium Anode Rod: Made with magnesium alloy and when the anode is electrically connected to the structure to protect, it makes more negative the electrochemcal potential than the structure itself. In this way the structure acts as the cathode and the magnesium alloy rod as the anode (therefore, the name magnesium anode). It is used to protect metallic structures that are in contact with water against corrosion.
	4. Heating Element Made of copper sheathed immersion type that has an electrical rating between 1.5kW- 3.0kW
	5. Thermostat c/w electrical cut-off device : To sense and to monitor the temperature of water in the inner tank between 40° C- 70° C approximately. Besides, it is equiped with a Bimetallic Thermal cut-off device, also called th third safety, which will be activated to cut off electricity supply should there be any malfunction of the thermostat.
	6. Safety Valve cum Non Return Valve : It has dual functions, one is to guard against excessive pressure built-up in the inner tank above 7.58 bar (11Dpsi), the other is to prevent water from the inner tank to flow back.
	7. Wide Range of Capacities : Both Elton and Ignis water heaters have a wide selection of standard capacities of between 3 gallons - 33 gallons to cater to individual requirements. We can also manufacture according to customers' requirements (tailor-made) to meet specific needs and applications both for domestic and commercial purposes.
	8. Easy Installation: Both Elton and Ignis water heaters, irrespective of capacities, can be easilly installated, whether wall-mounting or floor-mounting, vertical or horizontal version. Its unique design totally eliminates the need for vent pipes.
	9. Single I Multiple-Outlets: Both Elton and Ignis water heaters are stored under pressure, the flow of hot water can be diverted to either single or multiple outlets or at different levels.
	10. After Sales Service Being an established manufacturer 1960's, we are responsible and committed to after-sales service as we realize a product especially electric water heater need not only to meet up with buyers' expectation in quality and safety, the after-sales service is equally, if not more important. Our team of experienced technician is always ready to be on call to serve our customers. This is our commitment.

Notes:
1. Electrical parts cany a one (1) year warranty against manufacture' s defects.
2. All the above important component parts are fully imported.

更多 BWS Sales & Services Sdn Bhd 相关资料