T&J DECO SERIES 20A 100-240VAC Keycard Switch with Time-Off Delay (White / Matt Black / Charcoal Black / Matt Silver Black / Matt Silver) W6-2KT / W6-2KT-SBL / W6-2KT-ST / W6-2KT-MSB / W6-2KT-MSL

• W6-2KT

• W6-2KT-SBL

• W6-2KT-ST

• W6-2KT-MSB

• W6-2KT-MSL

• Rated supply voltage : 100-240VAC
• Output Relay : 20A
• Recommended wire size : 4mm² - 6mm²
• Off-delay time : 35±10 sec
• Card detection type : Mechanical (micro-switch)
• Dimensions : 115 x 72 x 8mm (WxHxD)
• Fix Center : 83.3mm 
• Fix Screw : 6# (32) x 20± 
• Mounting box : >35mm depth
• W111, flush mounting, plastic (101x67x50mm) (WxHxD)
• Comply to standards : IEC60669-1 / GB16915

1. Wire up the Keycard Switch as shown in the wiring diagram, ensure that the connections are properly tightened, use ferrule on wire if the wire size is not within the recommended.
2. After installation, power up the Keycard switch, after a short warm-up time, the output is on, after a delay of ~30 seconds, the output is cut off, the unit now enter a standby mode.
3. To activate the output, user slots in the card. To cut off the output (power), pull out the card. After a delay of ~30 seconds, output (power) will be automatically cut off.