PGE500 - RS485/ Analog Pirani Gauge: 马来西亚的首选 SOVAQ TECHNOLOGY SDN BHD

详情

The INFICON Pirani Gauge Enhanced 500 (PGE500) is equipped with the latest digital convection enhanced Pirani technology available on the market.

Due to the physical properties of convection this type of Pirani offers higher accuracy in the measurement range between 100 to 1000 mbar.

The rugged gauge and sensor design in combination with many factory built in features, such as the bright, sharp and clear OLED display with integrated keypad, RS485/RS232digital interface and 4 selectable analog output signals makes the PGE500 a high value/low cost of ownership choice. All these features qualify this gauge for many applications where an economical vacuum measurement from low to high vacuum range is required.

Granville-Phillips® and Mini-Convectron® are registered trademarks of MKS Instruments, Andover, MA

Advantages

Convection Enhanced Pirani Technology for wide measurement range and higher accuracy near atmosphere

All-in-One active gauge with built-in display, 2 set points, 4 analog output signals, and 2 digital interfaces

Bright digital OLED display with keypad for simple setup, calibration and operation

4 optional analog output signals (3 user selectable, 1 Default)

Factory pre-set analog output signal or selectable via keypad

Factory pre-set display units or selectable via keypad

User programmable set point relays (factory pre-set on request for volume orders)

Gold plated tungsten filament

Mechanical strength, highly robust and less susceptible to mechanical shock and vibration

Choice of flange options

Compliance & standards: CE, RoHS

Direct drop in replaces most Granville-Phillips^® Mini-Convectron^® modules (GP275) (Granville-Phillips^® and Mini-Convectron^® are registered trademarks of MKS Instruments, Andover, MA)

Typical applications

Fore vacuum pressure measurement

General vacuum measurement and control form low to the high vacuum range

Specifications

Measurement range N₂ mbar
Torr
Pa 1.3×10^-4 … 1333
1×10^-4 … 1000
1.3×10^-2 … 133'000

Accuracy (N₂)

1.3×10^-4 … 1.3×10^-3 mbar 0.1x10^-3 mbar resolution

1×10^-3 … 530 mbar % of reading ±10

530 … 1333 mbar % of reading ±2.5

1×10^-4 … 1×10^-3 Torr Torr 0.1 mTorr resolution

1×10^-3 … 400 Torr % of reading ±10

400 … 1000 Torr % of reading ±2.5

Repeatability (N₂) % of reading ±2

Admissible temperature

Operation (ambient) °C 0 … +40

Storage °C -40 … +70

Bakeout (electronics removed) °C ≤150

Supply voltage V (dc) +12 … +28

Setpoint relay: Number of setpoints Number of setpoints 2 (single-pole double-throw relays (SPDT)); 1A at 30V (dc) resisiv or V (ac) non-inductive

Materials exposed exposed to vacuum exposed exposed to vacuum
gold plated tungsten,

304 & 316 stainless steel,

glass, nickel, Teflon^®

更多 SOVAQ TECHNOLOGY SDN BHD 相关资料

Measurement range N₂	mbar Torr Pa	1.3×10^-4 … 1333 1×10^-4 … 1000 1.3×10^-2 … 133'000

Accuracy (N₂)

1.3×10^-4 … 1.3×10^-3 mbar		0.1x10^-3 mbar resolution
1×10^-3 … 530 mbar	% of reading	±10
530 … 1333 mbar	% of reading	±2.5
1×10^-4 … 1×10^-3 Torr	Torr	0.1 mTorr resolution
1×10^-3 … 400 Torr	% of reading	±10
400 … 1000 Torr	% of reading	±2.5

Repeatability (N₂)	% of reading	±2

Admissible temperature

Operation (ambient)	°C	0 … +40
Storage	°C	-40 … +70
Bakeout (electronics removed)	°C	≤150

Supply voltage	V (dc)	+12 … +28

Setpoint relay: Number of setpoints	Number of setpoints	2 (single-pole double-throw relays (SPDT)); 1A at 30V (dc) resisiv or V (ac) non-inductive

Materials exposed exposed to vacuum	exposed exposed to vacuum	gold plated tungsten, 304 & 316 stainless steel, glass, nickel, Teflon^®