|
Model No. |
AZ70-A6HPR-HD |
||
|
Mechanical Spec. |
Table Size (mm) |
70 X 75 |
|
|
Travel Stroke (mm) |
4 |
||
|
Drive Type |
Ball screw Ø8, lead 1mm, Slide wedge |
||
|
Rail |
Anti-creep Crossed Roller Guiding |
||
|
Stage Material / Surface Treatment |
Aluminum Alloy / Black Anodized |
||
|
Main Unit Weight (Kg) |
1.09 |
||
|
Coupling |
FAMMS12-5*5 |
||
|
Accuracy Level |
HPHigh Resolution grade |
||
|
Wiring Method |
RRight Wiring / LLeft Wiring |
||
|
Precision Spec. |
Resolution (Pulse) (µm) |
0.25 (Full)0.125 (Half) |
|
|
Max. Speed (Full Step) (mm / sec) |
2.5 |
||
|
Positioning Presion (µm) |
10 |
||
|
Repeatability Precision (µm) |
± 0.5 |
||
|
Load Capacity (Kgf) |
8 |
||
|
Missed Step (µm) |
1 |
||
|
Parallelism (µm) |
30 |
||
|
Dynamic Straightness (µm) |
5 |
||
|
Dynamic Parallelism (µm) |
20 |
||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / & 42 double shafts |
|
Brand / Model |
SANYO / 103-4507-7010 |
||
|
Driver Brand / Model |
Please refer to reference table |
||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|
|
Limit Sensor |
|||
|
Origin Approximation Sensor |
Photoelectric sensor GMT-sensor |
||
|
Power Voltage |
24V ± 10% |
||
|
Control Output |
NPN open collector output under 24V 8mA |
||
|
Output Control |
Testing (sensing)output transistor OFF (closed) |
||
| System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor0Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor0driver Reference Table |
|
|
|
|
