|
Model No. |
CXYZC8050-S2PN-CD-P1 CXYZC8050-F2PN-CD-P1 |
CXYZC8050-S2PN-CD-P2 CXYZC8050-F2PN-CD-P2 |
CXYZC8075-S2PN-CD-P1 CXYZC8075-F2PN-CD-P1 |
CXYZC8075-S2PN-CD-P2 CXYZC8075-F2PN-CD-P2 |
||
|
Mechanical Spec. |
Table Size (mm) |
80 X 80 |
||||
|
Travel Stroke (mm) |
50 |
75 |
||||
|
Drive Type |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
Ball screw Ø8 lead 1 mm |
Ball screw Ø8 lead 2 mm |
||
|
Rail |
Circular Linear Ball Guiding |
|||||
|
Stage Material / Surface Treatment |
SStainless Steel / Nickel Plating FCarbon Steel / Nickel Plating |
|||||
|
Main Unit Weight (Kg) |
6.48 | 6.99 | ||||
|
Coupling |
FAMCS11.6-5*5 |
|||||
|
Accuracy Level |
PPrecision grade |
|||||
|
Wiring Method |
NGMT Standard |
|||||
|
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full) 1 (Half) |
4 (Full) 2 (Half) |
2 (Full) 1 (Half) |
4 (Full) 2 (Half) |
|
|
Max. Speed (Full Step) (mm / sec) |
20 |
40 |
20 |
40 |
||
|
Positioning Presion (µm) |
5 |
7 |
||||
|
Repeatability Precision (µm) |
± 0.5 |
|||||
|
Load Capacity (Kgf) |
11 |
|||||
|
Missed Step (µm) |
1 |
|||||
|
Parallelism (µm) |
20 |
|||||
|
Dynamic Straightness (µm) |
2 |
|||||
|
Dynamic Parallelism (µm) |
10 | |||||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper XY-Axis& 28 double shaftsZ-Axis& 42 double shafts |
|||
|
Brand / Model |
SANYO / XY-AxisSH5281-7211Z-Axis103F5510-8211 |
|||||
|
Driver Brand / Model |
Please refer to reference table |
|||||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
||||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
|||||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
||||
|
Limit Sensor |
||||||
|
Origin Approximation Sensor |
N / A |
|||||
|
Power Voltage |
24V ± 10% |
|||||
|
Control Output |
NPN open collector output under 24V 8mA |
|||||
|
Output Control |
Testing (sensing)output transistor OFF (closed) |
|||||
| System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor0Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor0driver Reference Table |
|
|
|
|
 |
