Adhesive Bonding Agent For All Cementitious Products
Obaproof Bond ABC-505 is a special formulated homopolymer bonding agent. It has special plasticiser agent added for improving bonding strength of various substrates suitable for all cementitious products.
Advantage:
• Excellent bonding result
• Water resistance
• Cost saving
• Enhance work efficiency & time saving
• Easy application
• Environment friendly
Application Instructions:
• Surface preparation- The surface must be structurally sound and clean,free of oil, grease, wax, dust, sand, dirt, laitance, paints, efflorescence,curing compounds and loose materials of any type. If the surface is questionable, apply a small test patch of Obaproof Bond ABC-505.Allow to completely dry and observe for any signs of lifting, wrinkling,peeling or curling. If these occur, additional surface preparation is recommended.
Recommended cleaning methods are by high-pressure water jets.
• Obaproof Bond ABC-505 can be applied with paint roller and
paint brush.
• Open the original packing and use as it is, do not dilute with water
or solvent. Do not add any admixture.
• Do not use over water soluble materials such as glue, calcimine, wall paper, casein-based adhesive or where constant moisture is present.• Never shake and box mix as entrap air bubbles.
• Apply Obaproof Bond ABC-505 to the treated surfaces evenly.
Thin continuous unbroken film is recommended.
• Allow Obaproof Bond ABC-505 to dry. Approximately 30 minutes of drying time, subsequent activities can be carried out. (eg. plastering or tiling). Subsequent application of plastering, Skim coating and cement mortar for tiling shall be performed within 72 hours provided Obaproof Bond ABC-505 condition is clean, dust free, uncontaminated and intact.• Do not apply to wet surfaces or surfaces where there may be hydrostatic pressure such as retaining walls and swimming pool.
• Do not apply to frozen or frost covered surfaces or when temperature
is below 500f (10°c) is expected to be within 12 hours.
Malaysia
