The HI96777-01 are reagents for the colorimetric determination of Iron II and III. There are enough reagents for 100 tests to be used with Hanna’s compatible photometers. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.
Surface water typically contains up to 0.7 mg/L of iron. Drinking water typically contains up to 0.3 mg/L of iron, but this level may increase significantly if plumbing fixtures contain iron. In well-oxygenated, non-acidic waters, iron exists mainly in the ferric form (Fe3+) and will precipitate as iron oxide hydroxide (FeO(OH)). However, anoxic water may have high levels of dissolved ferrous iron (Fe2+), which could precipitate in heating/cooling systems or other equipment after exposure to air. The Iron (II)/(III) method can be used to distinguish between the ferrous (Fe2+) and ferric (Fe3+) forms of iron in a 2-step measurement process.
The HI96777-01 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents use an adaptation of Standard Methods for the Examination of Water and Wastewater, 23rd Edition, 3500-Fe B, Phenanthroline Method. During the first measurement, ferrous iron (Fe2+) reacts with 1,10-phenanthroline to form an orange-red complex. During the second measurement, ferric iron (Fe3+) is converted to ferrous iron (Fe2+) by the addition of Reagent B; the resulting measurement is the sum of ferrous (Fe2+) and ferric (Fe3+) iron.
| SKU | HI96777-01 |
|---|---|
| Product Name | Iron II and III Reagent Set (100 tests) – HI96777-01 |
| Quote Required | Yes |
| Package | Packets |
| Quantity | 100 tests |
| Method | adaptation of Standard Methods for the Examination of Water and Wastewater, 23rd Edition, 3500-Fe B, Phenanthroline Method |
Malaysia
