Coating Thickness Gauge CG220
This compact gauge can be used for non-destructive coating
thickness measurement of non-magnetic coatings,
e.g. paint, enamel, chrome on steel, and insulating coatings,
e.g. paint and anodizing coatings on non-ferrous metals.
The internal probe can work on both principles, magnetic
induction and the eddy currents. The probe can automatically
detect the substrates type (Magnetic or not), and calculate the
coating thickness and display it fast.
There are five data groups, and readings will be automatical-
ly stored to memory for general groups (Not for direct group).
Each group has individual statistics, alarm limit settings and
calibration. User can recall and delete specified readings easily.
User does all operations via standard menu so easily.
User can press the CAL button to start calibration freely.
FEATURES
1. 128*128 dot matrix LCD display, standard menu operations;
2. Two measure mode: single and continuous;
3. Two group mode: direct (DIR) and general(GEN), readings
will be lost when power off in direct mode, and not be lost in
general mode. 80 readings can be stored for each group;
4. Zero point calibration and multi-point calibration(up to 4 points)
for each group;
5. User can recall, delete specified readings, or delete group
readings;
6. Statistics display: mean, minimum, maximum and standard
deviation;
7. Three probe mode: auto, magnetic and eddy current;
8. User can set high or low limit alarm for each group;
9. Power off automatically;
10. USB interface to data transmission;
11. Low battery and error indication.
