BWP20-08: 马来西亚的首选 IMS Mechatronics Sdn Bhd

详情

Autonics Area Sensor (Picking Sensor)

Specification Table

Model	NPN open collector output	BWP20-08	BWP20-12	BWP20-16	BWP20-20
	PNP open collector output	BWP20-08P	BWP20-12P	BWP20-16P	BWP20-20P
Sensing type		Through-beam
Sensing distance		0.1 to 5m
Sensing target		Opaque materials of Min.ø30mm
Optical axis pitch		20mm
Number of optical axis		8pcs	12pcs	16pcs	20pcs
Sensing width		140mm	220mm	300mm	380mm
Power supply		12-24VDC ±10%(Ripple P-P : Max. 10%)
Protection circuit		Includes
Current consumption		Emitter: Max. 80mA, Receiver: Max. 80mA
Control output		NPN or PNP open collector output • Load voltage : Max. 30VDC • Load current : Max. 150mA • Residual voltage - NPN : Max. 1V, PNP : Min. 2.5V
Operation mode		Light ON/Dark ON by switch
Short-circuit protection		Built-in
Response time		Max. 6ms(Frequency B selection is max. 7ms)
Light source		Infrared LED(850nm modulated)
Synchronization type		Synchronized by synchronous line
Interference protection		Interference protection by transmission frequency selection
Environ-ment	Ambient illumination	Sunlight : Max. 10,000㏓ (received light side illumination)
	Ambient temperature	-10 to 55℃, storage : -20 to 60℃
	Ambient humidity	35 to 85%RH, storage : 35 to 85%RH
Noise resistance		±240V the square wave noise (pulse width: 1㎲) by the noise simulation
Dielectric strength		1,000VAC 50/60Hz for 1minute
Insulation resistance		Min. 20MΩ(at 500VDC megger)
Vibration		1.5mm amplitude or 300m/s² at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hour
Shock		500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times
Protection		IP40(IEC standard)
Material		Case : PC/ABS, Sensing part: PMMA
Cable		ø3.5, 4-wire, Length : 3m(Emitter : ø3.5, 4-wire, Length : 3m) (AWG 24, Core diameter : 0.08mm, Number of cores : 40, Insulator out diameter : ø1)
Approval		CE
Unit weight		Approx. 280g	Approx. 320g	Approx. 360g	Approx. 430g

Wiring Connection:

iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)

No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.

TEL:+607-8635240 FAX: +607-8637240

MOBILE: +6019-6774477

EMAIL: [email protected] | WhatsApp | www.ims.com.my

HOTLINE : 1700-818-330

whatsapp us now !

Brand Name

| MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |

Return / Refund Policy :
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.

Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.

Private Policy
General Statement of Principles
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at [email protected] with your request. We do not store any type of sales information.
Information Correction or Removal
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at [email protected] with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.

Changes To This Privacy Policy
This Privacy Policy is effective as of 1^st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.

更多 IMS Mechatronics Sdn Bhd 相关资料