Semiconductor Heater HG 140: Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Shah Alam Winston Resources

Description

Specifications:

Operating voltage	120-240V AC/DC* (min. 110V, max. 265V)
Heating element	PTC resistor - temperature limiting
Heater body	extruded aluminium profile, anodised
Connection	3 pressure clamps for stranded wire 0.5-1.5mm⊃2; (with wire
	end ferrule) and rigid wire 0.5- 2.5mm⊃2;
Connection casing	plastic according to UL94 V-0, black
Mounting	clip for 35mm DIN rail, EN 60715
Fitting position	vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature	-45 to +70°C (-49 to +158°F)
Operating/Storage humidity	max. 90% RH (non-condensing)
Protection type/Protection class	IP20 / I (earthed)
Approvals
Accessoires
Note	other voltages on request

Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.

Technical Data

Art. No.	Heating capacity*	Inrush current max.	Pre-fuse T (time-delay)	Length (L)	Weight (approx.)
14000.0-00	15W	1.5A	1A	65mm	0.3kg
14001.0-00	30W	3.0A	2.5A	65mm	0.3kg
14003.0-00	45W	3.5A	2.5A	65mm	0.3kg
14005.0-00	60W	2.5A	2.5A	140mm	0.4kg
14006.0-00	75W	4.0A	4A	140mm	0.5kg
14007.0-00	100W	4.5A	4A	140mm	0.5kg
14008.0-00	150W	9.0A	6.3A	220mm	0.7kg

Description:

A fan heater is a heater that works by using a fan to pass air over a heat source (e.g. a heating element). This heats up the air, which then leaves the heater, warming up the surrounding room. They can heat an enclosed space such as a room faster than a heater without fan, but, like any fan, create audible noise.

Fan heater application

1. Pressure clamp connectors
2. Dynamic heating up
3. Wide voltage range
4. Temperature limiting
5. Energy saving
6. Clip fixing
7. Quick installation

More detail about Winston Resources