i-14075A4-R: Top Choice in Johor Bahru JB Malaysia Sejati Teknik Sdn Bhd

Description

- The optimal energy efficiency of the fan motor is also realized by the inverter control.
- The permanent magnet IPM motor improves the efficiency by 5%.
- Ideal water lubrication system.The water lubrication is simple and environmentally friendly.
- The newly adopted IT touch panel enables smooth operation and control.

Model			i-14075A4-R
Items		Unit
Power frequency		Hz	50 / 60
Power supply voltage		50/60/Hz ,V	200/220/380/400/415/440
Free air delivery (0.7Mpa)		m³/ min	13.0 ( 14.7) *
Delivered air pressure		MPa	0.7
Pressure adjustment range		MPa	0.39 to 0.93
Pressure control method			Constant pressure control by inverter
Intake air pressure & temperature			Atmospheric pressure (2 to 40°C)
Main motor power		kW	75
Motor type			Totally enclosed fan cooled IPM motor
Starter			Inverter
Drive system			Direct coupled motor
Cooling system			Air-cooling
Fan motor power		kW	7.5 (inverter control)
Lubricant water amount			65
Dryer	Air dew point at outlet	°C	10 (under application of pressure)
	Refrigerant		R·410A
Discharge pipe diameter		R	2
Dimension,L×W×H (body)[without dryer]		mm	2005 x 1190 x 1800
Total mass (dry state)		kg	1900
Noise level [OP1.5m]		dB·A	63.5 to 67

Note: The 0.39MPa specification dryer is installed separately. Ask us if you want to know the dryer's dimensions and weight.
*The figure in ( ) is the discharge air volume 0.39MPa specification model.
*Noise level is measured at 1.5m (5') front of the machine and 1m (3') high with load 60 to 100% in anechoic status. (at 0.7MPa)

Note: The 0.39MPa specification dryer is installed separately. Ask us if you want to know the dryer's dimensions and weight.
*The figure in ( ) is the discharge air volume 0.39MPa specification model.

Outside Appearance

Adoption of the latest IPM (internal permanent magnet) motor!

Structural comparison of the permanent magnet motor and the induction motor

By installing the latest IPM motor (internal permanent magnet motor) which contains a permanent magnet in the latest rotor, the compressor is made smaller and the rotation is made faster. If compared with conventional induction motors, the IPM motor does not cause electricity loss or slipping of the rotor, thus drastically enhances the motor efficiency. Combined with Mitsui Seiki's advanced inverter, the total efficiency also overrides that of single induction motors. Heat generation is reduced, leading to further energy saving. Also, the motor direct-coupled driving system eliminates the loss of power, improves the engagement and the machining accuracy of the compressor's main parts, and achieves the efficiency which is much higher than conventional machines.

More detail about Sejati Teknik Sdn Bhd