■ Capacity: 10Nm/20Nm/50Nm/100Nm/500Nm
Please contact us now for product trial or demonstration!
This product is not for impact wrenches.
By monitoring rotation angle and torque at the same time, accuracy and consistency of torque tightening can be checked.
UTM II(W)specifications｜UTM II(WR)specifications
| UTM II(W) | ||
| Model | UTMⅡ-100Nm(W) | UTMⅡ-500Nm(W) |
|---|---|---|
| Measurement range | ±100Nm | ±500Nm |
| Power supply | DC24V ±15％ | |
| Power consumption | 150mA or less | |
| Output range | ±5V DC Load resistance must be more than 2kΩ | |
| Responsivity | 1kHz | |
| Rotation signal |
4 pulses per 1 rotation Open collector Max. ratings 30V, 10mA |
|
| Safe overload | 500%FS | |
| Non-linearity | 0.03%FS | |
| Hysteresis | 0.03%FS | |
| Repeatability | 0.03%FS | |
| Operation temp . range | -10 to +50℃ | |
| Temp. effect on ZERO | 0.01%FS/℃ | |
| Temp. effect on span | 0.01%FS/℃ | |
| Max. rotation speed | 15000rpm | 10000rpm |
| Torsional spring constant | 38.5×103 Nm/rad | 265×103 Nm/rad |
| Maximum torsional angle | 2.60×10-3rad（0.149°） | 1.88×10-3rad（0.108°） |
| Inertia moment | 3.8×10-5kgm2 | 2.15×10-4kgm2 |
| Ext. dimension (case size) | 67（W）×74（H）×57（D）mm | 67（W）×79（H）×72（D）mm |
| Total length | 100.5mm | 115mm |
| Shaft diameter | □12.7mm | □19.05mm |
| Weight | Approx. 0.8kg | Approx. 1.4kg |
| CE marking certification | EMC directives EN61326-1,EN61326-2-3 | |
| UTM II(WR) | ||||||
| Model | UTMⅡ-10Nm(WR)-6.35 | UTMⅡ-20Nm(WR)-6.35 | UTMⅡ-50Nm(WR)-9.53 | UTMⅡ-100Nm(WR)-12.7 | UTMⅡ-100Nm(WR)-19.05 | UTMⅡ-500Nm(WR)-19.05 |
|---|---|---|---|---|---|---|
| Measurement range | ±10Nm | ±20Nm | ±50Nm | ±100Nm | ±100Nm | ±500Nm |
| Power supply | DC24V ±15％ | DC24V ±30％ | ||||
| Power consumption | 100mA or less | 150mA or less | ||||
| Output range | ±5V DC Load resistance must be more than 2kΩ | |||||
| Responsivity | 1kHz | |||||
| Rotation signal |
4 pulses per 1 rotation Open collector Max. ratings 30V, 10mA |
|||||
| Angle of rotation (encoder) output | 3600 torque pulses per rotation | |||||
| Safe overload | 300%FS | 150%FS | 500%FS | |||
| Non-linearity | 0.03%FS | |||||
| Hysteresis | 0.03%FS | |||||
| Repeatability | 0.03%FS | |||||
| Operation temp . range | -10 to +50℃ | |||||
| Temp. effect on ZERO | 0.01%FS/℃ | |||||
| Temp. effect on span | 0.01%FS/℃ | |||||
|
Max. rotation speed （Measurable range for angle） |
10000rpm (800rpm) |
|||||
| Torsional spring constant | 2.15×103 Nm/rad | 17.6×103 Nm/rad | 26.4×103 Nm/rad | 54.6×103 Nm/rad | 136×103 Nm/rad | |
| Maximum torsional angle | 4.64×10-3rad (0.262°) | 9.29×10-3rad (0.532°) | 2.84×10-3rad (0.163°) | 3.78×10-3rad (0.217°) | 1.83×10-3rad (0.105°) | 3.68×10-3rad (0.211°) |
| Inertia moment | 4.64×10-6kgm2 | 3.33×10-5kgm2 | 3.58×10-5kgm2 | 1.92×10-4kgm2 | 2.06×10-4kgm2 | |
|
Ext. dimension (case size) |
77（W）×55（H）×40（D）mm | 87（W）×74（H）×57（D）mm | 87（W）×79（H）×72（D）mm | |||
| Total length | 96.5mm | 112mm | 120.5mm | 133mm | ||
| Shaft diameter | □6.35mm | □9.53mm | □12.7mm | □19.05mm | ||
| Weight | Approx. 0.31kg | Approx. 1.8kg | Approx. 0.9kg | Approx. 1.7kg | Approx. 1.8kg | |
| CE marking certification | EMC directives EN61326-1,EN61326-2-3 | |||||
|
Product catalogue(PDF)
|
UTMII catalogue(2 MB) | |
|---|---|---|
Malaysia
