Imada Digital Force Gauge (ZTA/ZTS Series)

Imada Digital Force Gauge (ZTA/ZTS Series)

Category: Force Gauge Available
For more information, visit our official website at mspmetrology.com.my

Description

ZTA Series: 
 
Force Gauge ZTA series offers all ZTS functions with additional features (displacement I/O) with 2N to 1000N capacity to perform the push pull gauge testing presented by MSP Metrology Sdn Bhd from Imada Japan

Features


ZTA Series

High Functionality Model Digital Force Gauge

High functionality type digital force gauge has capacity of 1000N and is equipped with additional functions to ZTS series, such as input/output of displacement and data saving to USB. Next series digital force gauges with firmware Ver.5 or later offers improved measurement stability with less noise, and optional functions and software can be downloaded from the dedicated website (IMADA-connected.com). Some functions require connection to separately-sold products.

 


 


Electro Luminescent EL Display

The display shows force value, unit and peak. Can be configured with additional user-selectable data include memory data, -NG count, high/low set point, 1st and 2nd peaks, displacement value and etc.

 


 


USB Software Capabilities

Included with device driver and ZT logger data acquisition software. The ZT Logger can download data from gauge memory or capture continuous stream data at 10 dtat/second. Zero the gauge or capture data while at computer.

 

 


 

Specifications

Model  ZTA
Feature Advanced model with various functions such as data saving in USB memory stick, displacement I/O and more.
Accuracy +/-0.2%F.S.+/-1digit
Unit of measurement(*1) N, kgf, lbf (*2)
Display 4-digit Organic EL
Display update 16 / sec
Sampling rate 2000 data / sec at maximum (*3)
Battery 8 hours (2 hours charge) (*4)
Safe overload rating Approx.200%F.S.
Operating environment Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH
Function Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory, Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping, Time display, 1st/2nd peak, Displacement detection at force peak value, Displacement zero reset at selected force, setting lock
Output USB, RS232C, Mitutoyo digimatic (*5), 2 VDC analog output (D/A),
Comparator 3 steps (-NG/OK/+NG), Overload alarm, Sub comparator 2 steps (output of large or small judgment), USB flash drive, Displacement.
Overload warning Approx.110%F.S. (Warning message and alarm )
External connecting switch SEND (a point of contact holding), Zero reset, Peak ON/OFF setting
Available linear scales (*6) – Online driver output (a line receiver according to RS422/485 must be built in.)
– Open collector output (Voltage drop between contacts must be smaller than 0.5V.)
Weight From 2N to 1000N model: Approx.490g (*7)
2500N, 5000N: Approx.1100g (*7)
Dimensions Please refer to dimensions.
Accessory AC adapter, Inspection certificate, CD driver (including simple software for data logging),
Attachments (The set of attachments varies according to range.), USB cable, Carrying case, Adaptor for USB flash drive. (*8)

*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 The battery is more consumed when connected to USB flash drive or a linear scale.
*5 Not always available for Mitutoyo digimatic products.
*6 Some linear scales could not be available even if they meet the mentioned specifications.
*7 Weight is slightly different according to range.
*8 USB flash drive is not included.


 

Model Capacity Display Resolution Thread Included Nut
Japan Model US Model
ZTA-2N ZTA-0.4 2N 2.000N (2000mN) 0.001N (1mN) M6 P1.0 (Coarse thread)
Thread length: 11.6mm
Hexagon nut
Material:Resin
Height:5mm
ZTA-5N ZTA-1 5N 5.000N (5000mN) 0.001N (1mN)
ZTA-20N ZTA-4 20N 20.00N 0.01N
ZTA-50N ZTA-11 50N 50.00N 0.01N
ZTA-100N N/A 100N 100.0N 0.1N
ZTA-200N ZTA-44 200N 200.0N 0.1N
ZTA-500N ZTA-110 500N 500.0N 0.1N
ZTA-1000N ZTA-220 1000N 1000N (1.000kN) 1N (0.001kN)
ZTA-2500N ZTA-550 2500N 2500N (2.500kN) 1N (0.001kN) M10 P1.5 (Coarse thread)
Thread length: 15mm
Hexagon nut
Material:Steel
Height:6mm
ZTA-5000N ZTA-1100 5000N 5000N (5.000kN) 1N (0.001kN)

 


 

Video

 

 


ZTS Series

 
Digital force gauge ZTS series is functional yet user-friendly model with 2N to 1000N capacity to perform the push pull gauge testing presented by MSP Metrology Sdn Bhd from Imada Japan

 

Features


ZTS Series

Standard Model Digital Force Gauge

Standard type digital force gauge has capacity of 1000N and is easy-to-operate and functional, with 2000Hz high-speed sampling for accurate peak measurement and smooth curve when graphing data. The included software enables data management via PC, and graphing software for detailed data analysis. Several external output methods are available for connection to various devices. Next Series digital force gauges with firmware Ver.5 or later has improved measurement stability with less noise, and optional functions and software can be downloaded from the dedicated website (IMADA-connected.com). Some functions require connection to separately-sold products.

 

 


 


Electro Luminescent EL Display

The display shows force value, unit and peak. Can be configured with additional user-selectable data include memory data, -NG count, high/low set point, 1st and 2nd peaks, displacement value and etc.

 


 


USB Software Capabilities

Included with device driver and ZT logger data acquisition software. The ZT Logger can download data from gauge memory or capture continuous stream data at 10 dtat/second. Zero the gauge or capture data while at computer.

 

 


 

Specifications

Model  ZTS
Feature Standard model with high functionality and usability.
Accuracy +/-0.2%F.S.+/-1digit
Unit of measurement(*1) N, kgf, lbf (*2)
Display 4-digit Organic EL
Display update 16 / sec
Sampling rate 2000 data / sec at maximum
Battery 8 hours (2 hours charge)
Safe overload rating Approx.200%F.S.
Operating environment Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH
Function Customized display (header and footer), Peak hold (tension and compression), Internal
1000 points data memory, Comparator (judgment of OK or NG), Reversible display, Sign
inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping,
Time display, Setting lock
Output Overload warning USB, RS232C, Mitutoyo digimatic (*3), 2 VDC analog output (D/A),
Comparator 3 steps (-NG/OK/+NG), Overload alarm
Approx.110%F.S. (Warning message and alarm )
External connecting switch SEND (a point of contact holding), Zero reset, Peak ON/OFF setting
Weight From 2N to 1000N model: Approx.490g (*4)
2500N, 5000N: Approx.1100g (*4)
Dimensions Please refer to dimensions.
Accessory AC adapter, Inspection certificate, CD driver (including simple software for data
logging), Attachments (The set of attachments varies according to range.), USB cable,
Carrying case

*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Not always available for Mitutoyo digimatic products.
*4 Weight is slightly different according to range.


 

Model Capacity Display Resolution Thread Attachment Nut
Japan Model US Model
ZTS-2N ZTS-0.4 2N 2.000N (2000mN) 0.001N (1mN) M6 P1.0 (Coarse thread)
Thread length: 11.6mm
Hexagon nut
Material: Resin
Height: 5mm
ZTS-5N ZTS-1 5N 5.000N (5000mN) 0.001N (1mN)
ZTS-20N ZTS-4 20N 20.00N 0.01N
ZTS-50N ZTS-11 50N 50.00N 0.01N
ZTS-100N N/A 100N 100.0N 0.1N
ZTS-200N ZTS-44 200N 200.0N 0.1N
ZTS-500N ZTS-110 500N 500.0N 0.1N
ZTS-1000N ZTS-220 1000N 1000N (1.000kN) 1N (0.001kN)
ZTS-2500N ZTS-550 2500N 2500N (2.500kN) 1N (0.001kN) M10 P1.5 (Coarse thread)
Thread length: 15mm
Hexagon nut
Material: Steel
Height: 6mm
ZTS-5000N ZTS-1100 5000N 5000N (5.000kN) 1N (0.001kN)

 


 

Video

 

 

More detail about MSP Metrology (M) Sdn Bhd
MSP Metrology (M) Sdn Bhd
MSP Metrology (M) Sdn Bhd Video Measuring Machine Johor Bahru (JB), Digital Microscope Supplier Malaysia, Selangor, Hardness Tester Supply Kuala Lumpur (KL), Penang, Singapore ~ MSP Metrology (M) Sdn Bhd
Contact Us flagMalaysia