The most compact footprint in its class. It enables to select an installation space easily
Reduction of power consumption contributes to cut running costs. This environmental-friendly machine also reduce the CO2 emission resulting from power consumption.
Stylus with smallest ball diameter is appropriate for measurements of small workpieces and extra small holes.
Compact design makes it possible to deliver through a common door. As it is not necessary to break the wall for delivery, no extra cost is required.
Standard Transport Dimension | Minimum Transport Dimension | Separated Transport Dimension | |
Depth (mm) | 1070 | 1000 | 1070 |
Width (mm) | 1080 | 1033 | 1080 |
Height (mm) | 2112 | 2096 | 1570 |
The automated indexing of the RTP20 allows the integral TP20 probe to be moved to 168 repeatable positions in 15-degree increments using both the A and B axes, requiring a one-time only qualification for each stylus position thus ensuring fast throughput for part inspection.
Improved productivity is achieved via probe module changing and automated indexing without the need for constant re-qualification.
Utilising the CMM motion to lock and orientate the head, together with the MCR20, provides a fully automated system.
A built-in extension together with existing extension bars allow reach up to 168 mm (including maximum stylus length).
TP20 modules have overtravel in all directions. The magnetic mounting provides additional crash protection in X and Y.
The MCR20 probe module changing rack is designed to securely store TP20 stylus modules ready for rapid automatic changing, whilst protecting mating surfaces from any airborne contaminants within the working environment.
Type | mju NEX-4 | mju NEX-6 | mju NEX-8 | mju NEX-9 | mju NEX-2 | ||
C4: CALYPSO | C6: CALYPSO | C8: CALYPSO | C9: CALYPSO | C2: CALYPSO | |||
X4: XYANA | X6: XYANA | X8: XYANA | X9: XYANA | X2: XYANA | |||
Measuring Range | X-axis (mm) | 510 | |||||
Y-axis (mm) |
460 (5/5/4 size) / 760 (5/8/4 size) |
||||||
Z-axis (mm) | 410 | ||||||
Length Measuring Method | Linear Scale System | ||||||
Minimum Unit (µm) | 0.01 | ||||||
Measurement Precision* |
Max. Permissible Error of Length Measurement E0, MPE (µm) E150, MPE (µm) |
2.7 + L/250 3.2 + L/250 |
2.2 + L/250 2.7 + L/150 |
2.7 + L/250 – |
2.2 + L/250 2.7 + L/150 |
2.7 + L/250 3.2 + L/250 |
|
Max. Permissible Limit of the Repeatability Range, R0, MPL (µm) | 1.8 | 1.4 (*1) | 2 | 1.4 (*1) | 1.8 | ||
Max. Permissible Single-Stylus Form Error PFTU, MPE (µm) | 2.7 | 2.5 (*1) | 3.3 | 2.5 (*1) | 2.7 | ||
Probe System | PH10T/TP20 | PH10T/TP200B | RTP20 | PH1/TP200B | PH1/TP20 | ||
Guide System of each Axis | Linear Guide with Air Bearing | ||||||
Table | Material | Gabbro | |||||
Effective Width (X) (mm) | 700 | ||||||
Effective Depth (Y) (mm) |
900 (5/5/4 size) / 1150 (5/8/4 size) |
||||||
Height from Floor (mm) | 725 | ||||||
Flatness | Class JIS 1 | ||||||
Fixing screw for object to be measured | M10 Internal Screw | ||||||
Workpiece Measured | Max. Height (mm) | 520 | |||||
Max. Mass (kg) | 200 | ||||||
Drive Speed | Max. Acceleration/Decelaration (mm/s²) | 1732 | |||||
Variable Speed Range (mm/sec) | Auto Measurement Mode:0.01 tp 433 (stepless control) | ||||||
Joystick and Manual Mode (Automatic Measurement): 0 to 120 (stepless control) | |||||||
Measuring Speed (mm/sec) | Joystick and Manual Mode (Automatic Measurement): 0 to 5 | ||||||
External Dimensions of Measuring Unit | Width (mm) |
1145 (5/5/4 size) / 1100 (5/8/4 size) |
|||||
Depth (mm) |
1256 (5/5/4 size) / 1536 (5/8/4 size) |
||||||
Height (mm) | 2170 | ||||||
Body Mass (kg) |
660 (5/5/4 size) / 920 (5/8/4 size) |
||||||
Precision Assurance Environmental Temp. Condition | Environmental Temp. (°C) | 18 to 22 | |||||
Temp. Change | (°C/hr) | 1 | |||||
(°C/day) | 2 | ||||||
Temp. Gradient (°C/m) | 1 |
*1 Temperature Condition: Environment temperature 18 to 24°C
*Measurement Precision [E0, MPE, E150, MPE and R0, MPL] are based on evaluation method of JIS B 7440-2:2013 (ISO 10360-2:2009)
[PFTU, MPE] is the evaluation method based on JIS B 7440-5:2013 (ISO 10360-5:2010)
* L is the distance between any two points (mm)
*The measuring accuracy is a numerical value measured under following specifications:
TP20, RTP20… LF Module and Standard stylus
TP200B… SF Module and Standard stylus
*Standard Stylus specifications:
Stylus tip diameter = Ø4, L = 20mm, Custom stylus of Renishaw