Description
ASTM D256/D1822, JIS k7110, CNS 3843/5846/8768/9284
Pendulum type of univesal impact tester is standardization testing method in internationally. It is use fixed pendulum height to do test which can achieve same impact velocity. The different strength of material can through different initial energy of hammer to do test. The pendulum energy can be change by hammer weight. QC-639F (G) digital type can change different pendulum and vise to do different testing method. This impact tester can proceed with parameters of abrasion loss, wind resistance and pendulum energy setting and calibration. High accuracy and easy operation, user can directly read test energy value from display. The standard model with activities transparent of protect cover which will be safety for using.
|
Specs |
Description |
|
IZOD type (ISO-13802) |
-
Capacity：1J，2.75J、5.5J、11J、22J (or appoint)
-
Impact velocity：3.5 m/sec±10％
-
radius of striker edge：0.8±0.2mm
-
Location of striking edge above tope face of support：22±0.2mm
-
Optional force grip: to change the clmap force
-
Specimen width：10mm or 12.7mm
-
Specimen thickness：3 ~ 12.7mm
|
|
Charpy type(ISO-13802) |
-
Capacity：0.5J、1J、5J( or appoint)
-
Impact velocity：2.9m/sec±10％
-
Radius of striker edge：2±0.5mm
-
Radius of curvature of supports：1±0.1mm
-
Position of midplane between supports:± 0.5mm
-
Specimen length：50 ~ 160 mm(span adjustable)
|
|
Others |
-
Energy loss：< 2.5%
-
Minimum display angle：0.05 angle
-
Digital controller: calculate impact energy, impact angle automatically
-
Calculate the impact stress by specimen size
-
With fix position device
-
With protection cover and protection lock
-
Manual or automatic (switchable)
-
Impact angle: 150°
-
Noncontact sensor: reduce the effect of friction.
-
Size：88 × 36 × 93 cm
-
Weight：180kg
-
Power：single phase, 100-240V
-
Optional accessories: software for saving and analysing data
|
More detail about Plasmost Enterprise Sdn Bhd
Malaysia
