Automated molding steps: place raw material of plastic or rubber into the mold, and press start button to pre-press specimens, then heating, forming and cooling. Make raw materials be shaped by molding, and become a sample for testing, color comparing or can be used as basis of factory mass production. Match with latest controller, dialogue windows make users understand setting and process easily. Users can grasp energy, time and temperature immediately by controller’s diagram. Furthermore, there are various selections of units; users can save more time from manual calculating.
| Specs | Description |
|---|---|
| Pressure | 10、20、30、50 ton (optional) |
| Units |
Temperature：℃、℉ Area：m2、cm2、mm2、ft2、in2 Energy：kgf、gf、tonf(long)、tonf(short)、lbf、ozf、kN、N、tonf(SI) Pressure：bar、kgf/cm2、KPa、MPa、mm-Aq(4℃)、psi |
| Temperature | Room temperature~ 300℃ |
| Size of heating plate | 30×30 cm (or designated) |
| Heating time | 50→150℃ take 18mins |
| Distance between heating plate | 120 mm (Max.) |
| Cooling method | Use cooling system to rapidly cool upper and lower mold |
| Cooling time | 150℃→60℃ 10mins |
| Steps can be set | Pre-press time, press time |
| Temperature can be set | Forming temperature, open mold temperature |
| Controller | 7” touch screen |
| Display | Instant energy, temperature, diagram |
| Protection | Full cover, emergency stop button |
| Dimension | 128×74×152 cm(W×D×H) |
| Weight | 680 kg |
| Power | 3 phase 220V/50 or 60HZ |
Malaysia
