Video Test - 3.5 inch LCD screen, display the video signal and the quality of picture. Video signal system PAL/NTSC could be auto suitable.
PTZ Control - The unit has the basic operation test of PTZ products, functions include pan/tilt, zoom in/out, preset setting and operation, auto scanning, speed adjustment etc; support multi-protocol and baud rate, communication via RS485 port, Protocol include : Pelco D/P and so on.
DC12V/1A output function - The CCTV Tester could supply power DC12V/1A to camera.
Audio Test - It can test the audio device which connected the CCTV Camera.
UTP cable test - The wiring condition (disconnected, short circuit and sequence of UTP cable) can be tested and display on the screen clearly.
RS485 data test - It can test the RS485 data sent from control device, display the hexadecimal data content for engineer to analyze.
Address Search - PTZ address scanning, search up the ID of PTZ camera.
Digital Multimeter (for the fourth & The fifth CCTV Tester) Digital multimeter could test voltage, current, resistance and capacitance, continuity, diode and so on.
Optical Power Meter (Only for The fifth CCTV Tester) - There are 1625nm, 1550nm, 1490nm, 1310nm, and 850nm for option. It can display as linear and nonlinear, not only test the optical power meter, but also the loss measurement. It is suitable for communication, cable television, and local network installation, debug and maintenance.
Malaysia
