NetAlly LinkRunner® AT NETWORK AUTOTESTER

NetAlly LinkRunner® AT NETWORK AUTOTESTER

Category: Wired Solutions Available
For more information, visit our official website at elsotech.com.my

Description

Key Features

• Discover nearest switch name and port information via CDP/LLDP/EDP
and verify link speed/duplex and connectivity to TCP/IP network
with AutoTest
• Validate up to 30W 802.3af/at PSE with TruePower™ loaded
Power-over-Ethernet (PoE) test
• Verify twisted-pair cable length and wire-map
• Automate reporting and enable collaboration with result upload and
management via Link-Live Cloud Service

Overview
The LinkRunner AT offers user-configured auto-tests for a wide range of important tasks. This network tester’s quick cable test and switch
identification facilitates fast problem isolation. Test results can be automatically uploaded to the Link-Live cloud service to improve
collaboration between network engineers and technicians, creating greater job visibility, project control, and fleet management. Validate
vital functions of copper or fiber Gigabit Ethernet links in less than 10 seconds with the comprehensive AutoTest

Capabilities
Discover Nearest Switch
• Uses LLDP, CDP, and EDP
• Displays nearest switch info:
– Switch name and model
– Switch chassis, slot and port#
– Switch IP Address
– VLANs supported
– Duplex and speed
– Signal Strength
– Connection (MDI or MDI/X)
– PoE voltage and power
– Graphical representation of power on pairs
Model 2000 vs 1000
• Both models support AutoTest, switch test, and cable test.
• Exclusive features on LinkRunner AT-2000:
– Fiber (SFP) support
– TruePower™ PoE power test up to 30W
– IPv6 support
– Reflector support
– 50 reports
– Li-ION rechargeable battery

Cable Test
• Locate cable runs with:
– Analog and IntelliToneTM toning
– Switch port advertisement
– Switch port link light blinking
– Remote cable identifiers
• Check patch cables using built-in wiremap port
• Easily find opens, shorts, miswires, and split pairs:
– On non-terminated cable
– With WireView cable identifier
– With built-in wiremap port
Reflector & Tools
• End-to-end network path performance tests against NetAlly
OneTouch AT to validate LAN and WAN throughput.
• Can swap MAC and/or IP addresses
Link-Live
• AutoTest results uploaded via Link-Live Cloud Service
• Provide proof of performance
• Better manage jobs and staff efficiency

More detail about ELSO Technologies Sdn Bhd
ELSO Technologies Sdn Bhd
ELSO Technologies Sdn Bhd Test & Measurement Equipment Distributor Penang, Malaysia, NetAlly, Rigol, Cromwell Distributor Singapore, Selangor, KL, Sarawak ~ ELSO Technologies Sdn Bhd
Contact Us flagMalaysia