Context Plus EP203CON Fire Control Panel in Weatherproof Cabin

Context Plus EP203CON Fire Control Panel in Weatherproof Cabin

Category: Fire Suppression System Available
For more information, visit our official website at abgapi.com.my

Description

A device that is designed to automatically activate the fire suppression system release sequence when fire is detected.
 
TECHNICAL DATA
Construction 1.2mm mild sheet steel
IP Rating IP30
Finish Epoxy powder coated
Colour – lid & box Red RAL 3002 (optional grey BS 00 A 05 semi-matt)
Mains Supply 230V AC or 115V AC
Mains Supply Fuse 1.6 Amp (F1.6A L250V)
Power Supply Rating 3 Amps total including battery charge 28V +/- 2V
Maximum Ripple Current 200 millivolts
Battery Type (Yuasa NP) Two 12 Volt 7Ah sealed lead acid in series
Battery Charge Voltage 27.6VDC nominal (temperature compensated)
Battery Charge Current 0.7A maximum
Battery Fuse 20mm, 3.15A glass
Maximum Current Draw from Batteries 3 Amps
Quiescent Current of Panel In Mains Fail 0.095A
R0V Output Fused at 500mA with electronic fuse
Sounder Outputs 24V Fused at 500mA with electronic fuse
Fault Relay Contact Rating 30VDC 1A Amp maximum
Fire Relay Contact Rating 30VDC 1A Amp maximum
Local Fire Relay Contact Rating 30VDC 1A Amp maximum
First Stage Contact Rating 30VDC 1A Amp maximum
Second Stage Contact Rating 30VDC 1A Amp maximum
Extract Contact Rating 30VDC 1A Amp maximum
Zone Quiescent Current 2mA maximum
Terminal Capacity 12 AWG
Number of Detectors Per Zone Dependent on type (maximum 32)

More detail about Intelligent Evolution Engineering Sdn Bhd
Intelligent Evolution Engineering Sdn Bhd
Intelligent Evolution Engineering Sdn Bhd Certified Fire Fighting Equipment Supplier Selangor | Fire Protection System Contractor Sungai Buloh | Fire Safety Solutions Malaysia ~ Intelligent Evolution Engineering Sdn Bhd
Contact Us flagMalaysia