Cone and Plate Viscometers

Cone and Plate Viscometers

Category: Rotational Viscometers Available
For more information, visit our official website at redmarkindustry.com

Description

Cone and Plate Viscometers
Most of paint and coatings are non-Newtonian fluids, its viscosity would show typical changes when applied with roller, brush or spray gun under high shear rates.
BGD 159 series Cone and Plate Viscometers designed by ISO 2884, ASTM D 4287 and BS 3900, can offer from 10,000S-1 to 12,000S-1 shear rates.
 
Features
- 7 inch touch screen with powerful human-computer interactive interface and rich information, easy to operate
- Interchangeable cones, simple to install and easy to clean
- Choice of shear rate. Standard speeds include 750 and 900 rpm to provide shear rate at 10,000 sec 1.
- only need small sample amount< 1 mL, simplifies testing
- Build-in PT100 temp. probe
- ARM chip processor and Gigabit Ethernet port ensure higher data processing speed and rapid& stable data transfer
- New designed durable axle, anti-static shell and metal lifter
- Come with heating and temp. control system, can set sample plate temperature from -5°C to120°C (L Type) or RT+5°C to 250°C (H Type)
- Variety of viscosity units and auto switch between dynamic and kinematic viscosity
- Calibration by usertemperature and correction factor protected by password                       
 
How to choose your suitable Viscometer?
1. Specify one speed or shear rate if this is required for your method.
2. Indicate viscosity range.
3. Select the temperature range that best suits your application:  -5°C to120°C (L Type) or RT+5°C to 250°C (H Type)
4. Choose from 10 cones for multiple viscosity ranges

 
Main Technical Parameters

Ordering Information  
  Parameters   
BGD 159/1
400 RPM


 
BGD 159/2
750 RPM


 
BGD 159/3
900 RPM


 
BGD 159/4
@5-1000 RPM


 
  Cone No.CAP-01
  Shear Rate
13.3N
Sample Volume67μL
47-469
mPa.s
25-250
mPa.s
20-208
mPa.s
20-37,500
mPa.s
  Cone No.CAP-02
  Shear Rate
13.3N
Sample Volume38μL
90-938
mPa.s
50-500
mPa.s
40-417
mPa.s
37-75,000
mPa.s
  Cone No.CAP-03
  Shear Rate
13.3N
Sample Volume24μL
180-1,875
mPa.s
100-1,000
mPa.s
80-833
mPa.s
75-150,000
mPa.s
  Cone No.CAP-04
  Shear Rate
3.3N
Sample Volume134μL
300-3,750
mPa.s
200-2,000
mPa.s
170-1,667
mPa.s
150-300,000
mPa.s
  Cone No.CAP-05
  Shear Rate
3.3N
Sample Volume67μL
600-7,500
mPa.s
400-4,000
mPa.s
300-3,333
mPa.s
300-600,000
mPa.s
  Cone No.CAP-06
  Shear Rate
3.3N
Sample Volume30μL
1,500-18,750
mPa.s
1,000-10,000
mPa.s
800-8,333
mPa.s
750-1,500,000
mPa.s
  Cone No.CAP-07
  Shear Rate
2.0N
Sample Volume1700μL
78-787
mPa.s
N/A N/A 32-63,000
mPa.s
  Cone No.CAP-08
  Shear Rate
2.0N
Sample Volume400μL
313-3,125
mPa.s
N/A N/A 125-250,000
mPa.s
  Cone No.CAP-09
  Shear Rate
2.0N
Sample Volume100μL
1,250-12,500
mPa.s
N/A N/A 500-1,000,000
mPa.s
  Cone No.CAP-010
  Shear Rate
5.0N
Sample Volume170μL
100-1,250
mPa.s
N/A N/A 50-100,000
mPa.s
NOTE: 
1. ''N''=Rotor Speed
2. Each Ordering Information has two different types according to temperature range-5°C to120°C (L Type) or RT+5°C to 250°C (H Type) 



More detail about Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd
Redmark Industry Sdn Bhd Testing Instruments Kuala Lumpur (KL), Industrial Supplies Selangor, Measuring Equipment Supplier Malaysia, Penang ~ Redmark Industry Sdn Bhd
Contact Us flagMalaysia