Paint often becomes soiled especially near doorways, windows, and in work and play areas. Coated surfaces need to be tested for resistance to abrasion caused by a brush, sponge, or other means. The Wet Abrasion Scrub Tester can produce a repeatable, controlled condition to simulate everyday use or wear patterns.
BGD 526 Wet Abrasion Scrub Tester is the newest machine which is developed by Biuged . It can examine washability and related properties that affect the stain resistance of coatings. Detergent performance testing can also be determined in a reproducible manner.
It accords with standards such as ASTM D2486、ASTM D 3450、ASTM D 4213、ASTMD 4828、DIN EN 11330、EN ISO 11998 etc.
Feature：
◆ Running speed can be set to meet requirements of different standards.
◆ With four-digit counter, start the machine and it will automatically be stopped when reaching
set times.
◆ Compatible with a variety of abrasion pads to comply with different standards requirements,
such as ISO, ASTM, DIN etc..
◆ Quickly and easily to load and unload testing samples and replacing abrasion head.
◆ Can work normally under different voltage and frequency
◆ With stable and uniform running speed because of Push-rod design
◆ Features two brush holders for side by side testing
◆ Long service life with hard and durable design
◆ The whole machine body is made of anodized aluminum, having stable working status, repeat able test results, no exception even in the fastest speed of the stroke.
◆ With peristaltic pump design, control scrub medium flow accurately.
Main Technical Parameters
■ Stroke Length：300mm
■ Specification of brush：Nylon brush bristles in 5/4 pattern extending 19mm from block.
■ Weight of brush （including device holding brush）：454±10 g（ASTM D 2486）；135±1g（ISO 11998）
■ Frequency of travel ：5～95 times/min（adjustable）
■ Range of count： 0～9,999 times
■ Size of test plate： 430×150×0.03mm
■ Power of motor：25W
■ Power：110V～220V；50/60 Hz
■ Overall size： 590mm×460mm×300mm（L×W×H）
■ Net Weight：27 KG
■ Capacity of Water Container：1L
■ Ordering Information:
BGD 526/1---Wet Abrasion Scrub Tester ( ASTM D 2486 )
BGD 526/2---Wet Abrasion Scrub Tester ( ISO 11998, no includes peristaltic pump )
BGD 526/3---Wet Abrasion Scrub Tester ( ASTM D 3450)
BGD 526/4---Wet Abrasion Scrub Tester ( ASTM D 4213 )
BGD 526/5---Wet Abrasion Scrub Tester (ASTM D 4828 )
BGD 526/6---Wet Abrasion Scrub Tester (DIN 53778)
BGD 527---Wet Abrasion Scrub Tester (ASTM D 2486& ISO 11998)
■ Optional Accessories:
BGD 1187---Abrasion Heads for ASTM D 3450（Sponge+ Weights, total weigh is 1,500g）
BGD 1188---Abrasion Heads for ASTM D 4213（Sponge+3M Scotch Brite handpads + Weights, total weigh is 470±
BGD 1189---Abrasion Heads for ASTM D 4828（Sponge+ Weights, total weigh is 1000±10g）
BGD 1191---Abrasion Heads for DIN 53778（Hog Bristle Brush+ Weights, total weigh is 250±10g）
BGD 1195---Abrasion Heads for ISO 11998（3M Scotch Brite handpads + Weights, total weigh is 135±1g）
BGD 1196---Abrasion Heads for ASMT D 2486（Nylon+ Weights, total weigh is 454±10g）
BGD 1197---Special Brush Carrier for Sponges Abrasion Heads
BGD 1045---Abrasive pad（3M Scotch Brite® handpads）（ISO 11998；Size---90×39mm; Pack of 50 pairs）
BGD 1364---Special nylon brush （ASTM D 2486；1 pair）
BGD 1365/A---Hog Bristle Brush（1 pair）
BGD 1510---Sponges (ASTM D 3450;12 pcs)
BGD 1511---Sponges (ASTM D 4213 & ASTM 4828 ;12 pcs)
BGD 2355---Brass Shim （165×12.7×0.25mm；pack of 10 pairs）
BGD 2208---Black plastic panel（ 432×165×0.25mm；pack of 100 pcs）
Note：If choose BGD 1187, BGD 1188 and BGD 1189, then BGD 1197 is necessary
Malaysia
