Description
The rotary arm wrappers are mainly used for the high speed packaging/logistic system. according to different packaging line, the Rotary Arm Wrapper can be designed for loads small or big, light or heavy.
It refers to rotate the goods around the rotary arm, thereby achieving wrapped the goods. All T-series wrappers can be wrapped with R-Series wrappers. In addition, the wrapping methods is more suitable for lighter, higher-level and unstable post-palletizing products or overweight goods. Flexible installation of the machine can be placed on the wall, can also be used to support fixed; and can be connected with the transmission line as needed to meet the demands of assembly line operations.
It is a fully automatic stretch wrap system that can operate-in-line with the other automatic equipment. It is ideal for tall stacked loads, which are unstable or too heavy to rotate.
The pallet is placed to the pallet wrapper from the infeed conveyor. The wrapping cycle automatically begins when the pallet stops in the wrapping position. Film attached against the pallet at the beginning of wrap and cut & grab film end after wrapping is finished. The wrapped pallet are moved to the outfeed conveyor and wait for unload. And the machine is ready for the next load.
Control system
-
PLC control system
-
Touch screen allows operation easier
-
Auto sensing pallet in-place & start wrap cycle
-
Auto cut & grab film after wrap finished
-
Film Tension Control adjustment on the panel
-
Separate variable carriage up/down speed
-
variable arm speed
-
Flash light for machine in operation
-
Rotary arm stop by safety bumper and reflection photo-eye
Arm(Mast)drive
-
Slewing Bearing drive system
-
Soft start/soft stop
-
Go back to the original start position after wrap cycle finished
Film carriage
-
Powered pre-stretch system up to 300% to the film length (Pre-stretch ratio can be customized)
-
Carriage door opens for effortless film change
-
Adjustable film feeding speed by separate AC Drive Motor
-
Rotating Power slip ring provide power required for carnage drive on rotary arm
Conveyor
-
Heavy structural steel frame construction
-
Heavy duty conveyor guards
-
Adjustable leg height
-
Different roller diameters and roll spacing available
-
Conveyor speed: 12m per min (other speed available)
Auto film tail cut & wipe system
-
Pneumatic damps grab the film end after the wrapping finishes
-
Hot wire film cut
-
Pneumatic brush activate
Option
-
Safety fence
-
Packing height: 2400mm, 2800mm
Technology Data
Max load size(mm) : 1200(L) X1300 (V/) X2200 (H)
Packing efficiency: 30-40load/h base on load
Arm speed: 3-15rpm
Power 2.0 kw 220V 50Hz 1 Phase
*Machine can be customized upon request
More detail about NuPon Technology
Philippines
