Description

HannYa 80L Thermal Shock Test Chamber Hot Zone And Cold Zone Separate Control

Machine introduction:

Programmable Environmental 2 Zone High Low Temperature Test Shock Chamber with Hot Zone and Cold Zone Separate Control is divided into two-box and three-box type, the difference is that the test method and internal structure are different, the product conforms to the standard: GB/T2423.1-2008 test A, GB/T2423.2-2008 test B, GB- T10592-2008, GJB150.3-198, GJB360A-96 Method

The hot and cold impact test box is a necessary test equipment for metal, plastics, rubber, electronics and other materials industries. It is used to test the structure of materials or composite materials, and can tolerance it under extremely high temperature and extremely low temperature in a continuous environment.

The chemical change or physical damage caused by thermal expansion and contraction of the sample can be detected in the shortest time.

Standards:

● GB-2423．1-89(IEC68-2-1)Test Mode A:Low Temperature Test

● GB-2423．2-89(IEC68-2-2)Test Mode B:High Temperature Test

● GJB360．8-87(MIL-STD．202F)High Temperature Life Test

● GBJl50．3(MIL-STD-810D)High Temperature Test

● GJBl50．4(MIL-STD-810D)Low Temperature Test

Product Descriptions

Imported compressor

The french import taikang compressor adopts the french taikang full-enclosed compressor, which is energy- saving, silent and high-efficient

Imported touch screen controller

Programming with original import controller, clear digital, flexible touch, larga capacity SD recording, powerful function.

Unique Apertune Pin Hole

Meet the test sample power, LED, power supply, digital industry preferred test chamber

Closed design of condenser

The condenser is surrounded by a closed design and the heat dissipation performance is very good

Specifications:

Model		HY-TS-50	HY-TS-80	HY-TS-100	HY-TS-150	HY-TS-200	HY-TS-300	HY-TS-480
System		(BTC) Balanced temperature control system
High temperature zone		+60℃~200℃ Optional
Preheating time		+60℃~200℃ About 20 minutes
Low temperature zone		-55℃~10℃, -70℃~10℃, -80℃~10℃
Precooling time		+20℃~-55℃ 60 minutes, +20℃~-75℃ 75 minutes, +20℃~-80℃ 90 minutes,
Recovery time		Within 5 minutes, heat exposure 30 minutes, low exposure 30 minutes,
Transfer time		Within 10 seconds
Temperature flucturation		±1.0℃
Temperature deviation		≤±2.0℃
Interior dimension(cm)	W	40	50	55	68	68	80	80
	H	40	40	45	45	50	50	55
	D	32	40	40	50	60	75	93
Test weight (KG)		3.5	5	5	5	10	12	15
Interior material		SUS#304 Stainless steel plate
Exterior material		Backed paiting steel or stainless steel(SUS304)
Insulation material		Rigid polyruethane foam +glass fibre
Floor bearing load		500Kg/m3
Refrigeration system		Air cooled (Water cooled type is option)
		Cascade type, hermetic/semitight compressor,CFC free refrigerant
Controller		Color LCD screen in English/Chinese, programing,communicating function
Safety devices		No welding wire switch,compressor overheating and over current protection,over temperature protection, blower overload protection,dry heating machine protector,low water protection,fault warning system.
Power		AC380±10% 50HZ 3 phase 4 wires+ground wires

Manufacturer #Indonesia #Thailand #Philippines #Singapore #Vietnam

More detail about Redmark Industry Sdn Bhd

HannYa 80L Thermal Shock Test Chamber Hot Zone And Cold Zone Separate Control (HY-TS-480)

HannYa 80L Thermal Shock Test Chamber Hot Zone And Cold Zone Separate Control