SELLEYS ALL FIX 80G

SELLEYS ALL FIX 80G

Category: SELLEYS Available
For more information, visit our official website at chenghuathardware.com.my

Description

Selleys All Fix

Selleys All Fix is a solvent free, high strength adhesive with instant (fast) grab* on porous surfaces that eliminates the need for nails and screws in many jobs. It has a thick, non-runny consistency that will bond a wide variety of materials.

● Water based, easy water clean up while still wet
● Safe for children
● Adjustable within 5-10 minutes
● Fills minor gaps in uneven surfaces
● Ideal for sticking most surfaces, minor fixes (eg: wood, plastics, ceramics)

Where can this product be used?
● Woodworking
● Fixing broken toys
● Repairing wooden picture frames
● Craft works

What materials is this product suitable for?
● Wood
● Particle board
● Metals
● Glass
● Ceramics
● Brick
● Concrete
● Cork
● Polystyrene foam
● UPVC
● Many rigid plastics

Direction:

1. Surfaces to be bonded must be dry, free from grease, oil and dust.
2. Apply Selleys All Fix on needed surface and leave to dry for at least 6 hours
3. Time to develop bond is increased if surfaces are non-porous or in wet, damp and cool weather.
4. Adhesion may take up to 24 Hours. NOTE: Slow-dry adhesives gives maximum bonding results.
5. Form bonds immediately by pressing parts firmly together or clamped.
6. Can fill minor hairline gaps if needed (not exceeding 10mm)
7. Wipe away excess adhesive with a damp cloth. Dried adhesive is best removed by scraping.
8. Not suitable for bonding plastic such as polyethylene, polypropylene, mirrors, other flexible plastics and rubbers.
9. Use temporary supports when bonding a heavy load – support until adhesive dries.
10. Product to be stored in cool dry place.

Limitations:

● Not suitable for permanently wet or damp areas.
● Not suitable for fixing mirrors. Use Selleys Liquid Nails Mirror Aluminium
● *Not suitable for polyethylene and polypropylene.
● Bonds are not water resistant. Protect bonds from water penetration if used in exterior applications.
● Not resistant to strong acids and strong organic solvents.
● Do not apply below 10°C.
● When used near brass or copper, the immediate area of contact will discolour to a blue tone.

More detail about Cheng Huat Hardware Enterprise (Jalan Ipoh) Sdn. Bhd.
Cheng Huat Hardware Enterprise (Jalan Ipoh) Sdn. Bhd.
Cheng Huat Hardware Enterprise (Jalan Ipoh) Sdn. Bhd. Building Materials Provider, Hardware Supplier, Bathroom Fixtures & Accessories Supply in KL, Selangor, Malaysia | Cheng Huat Hardware
Contact Us flagMalaysia