Tenmars TM-24E AC/DC Clamp Meter

Description

Application

• Measuring voltage over 20V as it may cause human body electricity conduction.
• Measure AC power. 
• Operating Environment: Indoor use. This instrument has been designed for using in an environment of pollution degree 2.
• Operation Altitude: up to 2000m.
• Operating Temperature & Humidity: 5℃ ~ 40℃,below 80%RH.
• Storage Temperature & Humidity: -10℃ ~ 60℃, below 70%RH.
• Fingers should hold under the protection guard of test probe.
• Category: ICE 1010-1 CATⅡ 600V .
                   ICE 1010-1 CATⅡ 1000V .
                   ICE 1010-2-032  CATⅢ 600V .

Features

AC Current (ACA) /DC Current (DCA) measurement

• Make sure that all the test leads are disconnected from the meter’s terminal for current measurement.

AC Voltage (ACV) /DC Voltage (DCV) measurement

• Maxim input for DCV or ACV is 600V.

Resistance measurements

• Before measuring the resistance, please be sure to remove power from the circuit being tested and discharge all the capacitors.
  If the reading is over range, the symbol “OL” will be displayed.

Specifications

• Display: 3½digits LCD with maximum reading 1999, Plus decimal point, unit symbol indication.
• Overload Indication: LCD will show a “1” in the left highest position.
• Low Battery Indication: Replace battery as LCD display “ ”.
• Sampling Rate: 2 times per second for digital display.
• Jaws opening:Max. 36mm
• Conductor size:Max. 35mm
• Dimension: 218mm(L)x75mm(W)x43mm(H).
• Weight:about 360g. (Including battery)

Electrical Specifications

DC CURRENT
Range	Resolution	Accuracy	Overload Protection
200A	0.1A	±(1.5%+5)	800A rms (60 second)
600A	1A	±(2.0%+5)

 

ACV CURRENT
Range	Resolution	Accuracy 40Hz~65Hz	Overload Protection
200A	0.1A	±(2.0%+5)	800V rms (60 second)
600A	1A

 

DC VOLTAGE
Range	Resolution	Accuracy	Overload Protection
200V	0.1V	±(1.0%+3)	600V rms
600V	1V

 

AC VOLTAGE
Range	Resolution	Accuracy	Overload Protection
200V	0.1V	±(1.2%+5)	600V rms
600V	1V

 

RESISTANCE
Range	Resolution	Accuracy	Max. Open Voltage	Overload Protection
2K!&	1!&	±(1.0%+3)	0.4VDC	550V rms
200K!&	0.1K!&

 

CONTINUITY TEST
Range	Resolution	Accuracy	Test Voitage	Overload Protection
	1mV	±(1.0%+2)	<3.3V	550V rms

※Also with buzz function for continuity purpose,buzz will sound
when the measured resistance is below 40!&

DOIDE CHECK
Range	Resolution	Test Voitage	Overload Protection
	1mV	<3.3V	550V rms

 

FREQUENCY(Auto-range)
Range	Resolution	Accuracy	Max. Sensitivity	Overload Protection
2KHz	1Hz	±(0.5%+3)	1.5V rms	550Vrms
20KHz	10Hz
200KHz	100Hz

 

More detail about MTM Precision Sdn Bhd