Filter Cartridge for Particulate Removal - FO Series

Filter Cartridge for Particulate Removal - FO Series

Category: High Flow Fuel and Oil Filtration Out of stock
Purchasable on official site
For more information, visit our official website at hinsitsu.com.my

Description

Velcon FO Series features high efficiency particulate media and a long service life. FO Series cartridges extend coalescer life and protect critical equipment downstream. 

Features Include:

• EI 1590 Qualified Filter Cartridges
• Large Surface Area – Allows high flow rate with low initial pressure drop and maximum contaminant holding capacity.
• Resinated Media – Maintains strength resists effects of water and heat.
• 75 PSI Collapse Strength – Heavy gauge carbon steel center tubes give safety margin against pressure surges.
• Coated Steel Components – Resist corrosion from most industrial fluids.
• Corrugated Media – More surface area ensures longer service life. 
• Buna-N Gaskets – The best general gasket material available assures positive seal in most fluids.
• Thermoset Bonding Material – Durable endcap-to-media bond prevents internal bypassing
• Threaded base filter cartridges – Available for easier installation.
• These are also available in screw-base design

Applications:

Velcon Pleated Media Cartridges are suitable for a broad range of polar and non-polar fluids. Recommended for applications where the contaminant is granular (non-colloidal), allowing maximum utilization of the high surface area.

Suitable for:

• Jet Fuel
• All Hydrocarbon Fuels
• Cutting Oils
• Glycols
• Degreasing Fluids
• Water Emulsion Coolants
• Naphtha
• Lube Oils
• Ethyl Alcohol
• Insulating Oils
• Toluene
• Synthetic Oils
• Hydraulic Oils
• Diesel Fuel
• Biodiesel Fuel

Specifications:

• Recommended changeout differential pressure - 25 psid
• 75 psi Collapse strength
• Micron ratings from 1/2 to 75
• 98%+ Nominal filtration efficiency
• 5 - 9 Operating pH range
• 250°F Maximum operating temperature
• Multi-pass (Beta Ratio) data available on request
• For information about Flow Ratings with various viscosity fluids, refer to Form #1532
• Flow rate depends on the fluid



Performance Characteristics
Maximum Operating Temperature (F) 250, 200
Maximum Operating Temperature (C) 121, 93
Filter Type Particulate
Application Aviation Fuels/Industrial, Natural Gas, Ethanol
pH Range (Continuous Operation) 5 - 9
Brand Velcon
Flow Rate Depends on fluid viscosity and application. See brochure for more information.

More detail about Hinsitsu Auto Parts Sdn Bhd
Hinsitsu Auto Parts Sdn Bhd
Hinsitsu Auto Parts Sdn Bhd Shield-Star Filter Supplier Selangor, Port Klang, Industrial Filter, Tractor Filter Supply Kuala Lumpur (KL), Malaysia ~ Hinsitsu Auto Parts Sdn Bhd
Contact Us flagMalaysia