DULUX AURA HIGH GLOSS FINISH 1L

Dulux Aura High Gloss is a premium solvent based high gloss finish that gives a smooth mirror – like finish

Brush or Roller-Thinning is usually not necessary after thorough stirring. If required, dilute the paint up to 10% with white spirit. Conventional Spray-Dilute with 10%-20% of white spirit. Airless Spray-Ready for use.

• Finish High Gloss

• Coverage ≈ 18 m²/L

• Drying Time Single coat at standard thickness: Touch Dry : 2-4 hours. Recoat : 6-8 hours.

• Coats 2

Preparing the Surfaces

Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any scrapped area should be spot primed. Light sanding on surface would ensure better subsequent intercoat adhesion. Ferrous surfaces should be sanded or wire-brushed to remove millscale and rust. Remove the rust thoroughly and the area should be spot- primed. For optimum performance, new galvanized and aluminium surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion.

Cleaning

Clean all equipment with white spirit immediately after use.

Storing

Keep away from food, drinks, animal feed and out of reach of children. Keep away from combustible material. Container must be stored in a cool and shaded place.